Underwriting Authority Letters for Reinsurers: Field Guide
On this page
- Key Takeaways
- What Are Underwriting Authority Letters for Reinsurers?
- What Fields Should an Underwriting Authority Letter Contain?
- How Do Underwriting Authority Breaches Happen on Treaty Business?
- Which Red Flags Suggest Authority Letters Are Out of Date?
- Who Checks Underwriting Authority Compliance, and When?
- How Does Insurnest Support Underwriting Authority Control?
- What Should a CUO Change in the Next Authority Review Cycle?
- Key Terms
- Sources
- Frequently Asked Questions
Last reviewed: November 2026
An internal audit sample finds a treaty line written six months ago that exceeded the underwriter's limit. The letter on file expired in March.
The underwriter had been promoted, the new letter was never signed, and nobody noticed until audit came round.
Underwriting authority letters for reinsurers are signed documents that set out what each underwriter may write, up to what limits, and when to refer.
Keeping them current and enforced means writing limits the way treaties are written, testing every bound line against them, and reviewing them on a fixed cycle.
Key Takeaways
- Write limits in treaty terms. Monetary line per layer, aggregate per programme and event caps by zone.
- Test the written line. Signing down may never happen.
- Fix the currency rule. A EUR line can breach a USD limit after conversion.
- Expiry is a control. A lapsed letter means no recorded authority at all.
- Breaches hide across layers. Each layer can pass while the programme fails.
What Are Underwriting Authority Letters for Reinsurers?
Underwriting authority letters for reinsurers translate the business plan and risk appetite into personal, testable limits for each underwriter.
They are a prevention control. Peer review and audit are the detection controls that check the letters work.
Lloyd's MS2 Underwriting and Controls expects managing agents' authorities to be written, properly authorised, signed and reviewed annually.
It also expects each letter to name the legal entity and the effective period. Other reinsurers set their own rules, but MS2 is a useful benchmark.
What Fields Should an Underwriting Authority Letter Contain?
The fields an underwriting authority letter should contain fall into four groups: identity and period, capacity, pricing and terms, and referral.
Which identity and period fields does an authority letter need?
Identity and period fields tell anyone checking a treaty whether a valid authority existed on the bind date.
| Field | What to record | Why it matters |
|---|---|---|
| Underwriter and role | Name, title, team | Role changes should trigger a new letter |
| Legal entity | Each carrier the underwriter may bind | Group reinsurers write on several balance sheets |
| Effective and expiry dates | By underwriting year | A lapsed letter leaves no authority |
| Issuer and counter-signatory | Name, role, date | Shows the authority was properly granted |
| Underwriter acknowledgement | Signature and date | Proves the underwriter accepted the limits |
Which capacity limits should a treaty authority letter set?
Capacity limits in a treaty authority letter should match how lines are actually written and accumulated.
MS2 lists elements such as maximum line size, maximum premium per risk or programme, territorial limits and method of placement.
| Limit | How to express it | Treaty trap |
|---|---|---|
| Classes and contract types | Quota share, surplus, per risk XL, cat XL, facultative, retro | "Property" alone leaves cat XL open |
| Lead or follow | Lead allowed, follow only, or by class | Leading also commits wording authority |
| Maximum line per contract | Monetary amount, share × limit | A share cap ignores layer size |
| Aggregate per cedent programme | Sum of lines across all layers | Each layer can pass while the total fails |
| Event exposure by zone | Modelled loss or limit in each peril zone | Treaties written by different underwriters accumulate |
| Maximum premium per contract | Gross written premium | Large quota shares can exceed premium appetite |
| Territories | Allowed and excluded countries | Worldwide treaties need explicit approval |
| Maximum period | 12 months, or multi-year allowed | Multi-year deals lock capacity in |
Which pricing and terms limits belong in an authority letter?
Pricing and terms limits in an authority letter set how far an underwriter may move from benchmark price and standard terms.
- Benchmark price variance. The furthest below technical price the underwriter may bind.
- Brokerage and ceding commission ceilings. Deductions above these need referral.
- Wording authority. Whether the underwriter may agree deviations from standard wordings.
- Endorsement authority. Mid-term changes the underwriter may agree alone.
- Currencies and conversion. Allowed currencies and the rate used to test limits.
Which referral rules should an authority letter spell out?
Referral rules in an authority letter should name who approves each type of excess and how the approval is recorded.
MS2 expects risks outside an underwriter's authority to be escalated to someone with the right authority, with escalations properly recorded.
For per-deal capacity approval, see our guide to treaty capacity sign-off workflow.
How Do Underwriting Authority Breaches Happen on Treaty Business?
Underwriting authority breaches on treaty business usually happen in the gaps between how limits are written and how treaties are bound.
| Breach scenario | Limit breached | How it is detected | Impact |
|---|---|---|---|
| Lines on several layers of one programme | Aggregate per programme | Sum lines by cedent programme | Concentration on one cedent |
| Line written in another currency | Maximum line | Convert at the letter's rate | Limit exceeded after conversion |
| Relying on signing down | Maximum line | Test written, not signed, line | Breach if not oversubscribed |
| Writing after a role change | Expired authority | Compare bind date with letter dates | No valid authority on record |
| Leading when authorised to follow | Lead restriction | Check lead flag on slip | Wording agreed without authority |
What does a cross-layer authority breach look like in numbers?
A cross-layer authority breach looks compliant layer by layer and only fails when the programme is totalled. This example is illustrative.
The underwriter's letter allows USD 10m per contract and USD 20m per cedent programme. The underwriter writes three layers of one cat programme.
| Layer | Limit | Written line | Monetary line |
|---|---|---|---|
| 1 | 40m xs 20m | 15.0% | 6.0m |
| 2 | 60m xs 60m | 12.5% | 7.5m |
| 3 | 80m xs 120m | 10.0% | 8.0m |
| Total | 21.5m |
Each layer is within 10m. The programme total of 21.5m is 1.5m over the 20m cap.
Without a referral, Layer 3 could take at most 20m − 13.5m = 6.5m, which is 6.5m ÷ 80m = 8.125%.
How can a currency difference cause an authority breach?
A currency difference causes an authority breach when a line in one currency is tested against a limit set in another.
The same underwriter writes a EUR 9.5m line. At a letter rate of 1.10 USD per EUR, that is USD 10.45m, over the 10m per contract limit.
If the letter names no rate, the underwriter and the checker can use different rates and reach different answers.
Which Red Flags Suggest Authority Letters Are Out of Date?
Red flags that suggest authority letters are out of date show up in HR, planning and treaty records before they show in audit.
- Role changes with no new letter. Promotions, transfers and leavers in the last year.
- Limits below the plan. Line sizes in letters smaller than the approved plan uses.
- Classes in the treaty book missing from letters. New lines written without explicit authority.
- Referrals with no record. Approvals given by email or verbally, not stored with the treaty.
- Letters with no expiry date. Open-ended authority that is never reviewed.
Who Checks Underwriting Authority Compliance, and When?
Underwriting authority compliance is checked by several people at different points, and each check needs a named owner.
| Check | Owner | When |
|---|---|---|
| Own authority before writing | Underwriter | Every line |
| Bound line against letter | Underwriting operations | At treaty set-up |
| Programme and zone totals | Underwriting governance or exposure team | Weekly in renewal season |
| Sample of bound treaties | Peer review | Monthly or quarterly |
| Letters against roles and plan | Head of underwriting governance | Annually and on role change |
| Control effectiveness | Internal audit | Audit cycle |
How Does Insurnest Support Underwriting Authority Control?
Insurnest does not manage underwriting authority letters, referrals, approvals or breach alerts. Those stay with your governance process.
Treaty Management holds the treaty side the checks rely on: participation and share configuration, limits, retention and thresholds.
Amendments are versioned with calculation history and an audit trail, so governance teams can see which share and limits applied on any date.
Output depends on the configured structure, and teams remain responsible for validating it. For acceptance controls, see inward treaty acceptance workflow.
What Should a CUO Change in the Next Authority Review Cycle?
A CUO should use the next authority review cycle to rewrite limits in treaty terms and test them against last year's bound lines.
- Add a programme aggregate. Set it per cedent programme, not only per contract.
- State the currency rule. Name the rate and date used to convert lines.
- Test on written lines. Make this explicit in every letter.
- Link letters to role changes. HR moves should trigger a new letter within days.
- Back-test the book. Run last renewal's lines from the reinsurance treaty register against the new letters.
Key Terms
- Letter of authority: A signed record of what an underwriter may write and up to what limits.
- Monetary line: A reinsurer's share multiplied by the contract limit. See reinsurer participation share calculation.
- Programme aggregate: The total of an underwriter's lines across all layers of one cedent programme.
- Referral: Escalation of a risk outside authority to someone with higher authority.
Sources
- Lloyd's: MS2 Underwriting and Controls (January 2021)
- Insurnest: Reinsurance Treaty Management
Frequently Asked Questions
What are underwriting authority letters for reinsurers?
Underwriting authority letters for reinsurers are signed documents setting out what each underwriter may write: classes, contract types, territories, maximum lines, pricing latitude, period and referral routes. They turn the business plan into personal limits that can be tested against every treaty written.
What should an underwriting authority letter include?
An underwriting authority letter should include the legal entity, effective period, classes and contract types, territories, maximum line per contract and per programme, maximum premium, pricing variance, brokerage and commission ceilings, wording authority, currencies and a referral procedure for anything outside these limits.
How often should underwriting authorities be reviewed?
Underwriting authorities should be reviewed at least annually and whenever an underwriter's role, the business plan or the risk appetite changes. Lloyd's MS2 expects authorities for managing agents to be written, properly authorised, signed and reviewed annually.
How do you write an underwriting authority letter for treaty business?
To write an underwriting authority letter for treaty business, state limits in the way treaties are written: maximum monetary line per layer, an aggregate per cedent programme, event exposure caps by zone, contract types allowed, currencies with conversion rules, and named referral routes.
Why should authority be tested on the written line?
Authority should be tested on the written line because signing down is not certain. If a placement is not oversubscribed, the written line becomes the signed line, so an underwriter who relied on signing down to stay within authority would be in breach.
What is a common underwriting authority breach on treaty business?
A common underwriting authority breach on treaty business is exceeding a per programme aggregate while every single layer stays within its own line limit. The breach only shows when lines on all layers of the same cedent programme are added together.
Who should monitor compliance with underwriting authorities?
Compliance with underwriting authorities is usually monitored by underwriting operations or the underwriting governance team, with peer review and internal audit as detection controls. Underwriters remain responsible for checking their own authority before they write a line.
Does Insurnest manage underwriting authority letters?
Insurnest Treaty Management does not manage underwriting authority letters, referrals or breach alerts. Treaty Management holds structured treaty records with shares, limits, retention, amendments and an audit trail, which governance teams can use as the source when testing written lines against authorities.

Hitul Mistry
CEO, Insurnest
An InsurTech leader with more than a decade of experience across insurance and technology, focused on solving business problems with the help of technology. Has worked with brokers, insurance carriers, and reinsurance firms across the India, UAE, and US markets.
View LinkedIn profile →