Reinsurance

Treaty Capacity Sign-Off Workflow: Approve Before You Commit

On this page

Last reviewed: November 2026

The firm order is sent at 11 pm on 30 December, and the capacity approval is a thumbs-up in a chat.

In March, the CRO asks who approved that line and against which numbers.

A treaty capacity sign-off workflow confirms that each proposed line fits approved capacity before the underwriter commits.

It names who models, who approves at each tier and who records the approval against the bound share.

What Is a Treaty Capacity Sign-Off Workflow?

A treaty capacity sign-off workflow is the agreed route a proposed treaty line takes from request to recorded approval.

It joins personal underwriting authority to portfolio limits. Both must be satisfied before the firm order.

Capacity here means the share of modelled exposure, premium or limit a reinsurer has budgeted by class, peril and zone.

Why Do Underwriters Commit Before Approval Is Recorded?

Underwriters commit before approval is recorded because renewal deadlines reward speed, and recording feels like admin.

The risk is not always a bad decision. It is a decision nobody can evidence later.

Why does renewal season compress sign-off?

Renewal season compresses sign-off because many firm orders land in the same few days.

Exposure teams model in batches, approvers are stretched, and the final share often changes after modelling.

Why are chat and email approvals not enough?

Chat and email approvals are not enough because they rarely state what was approved.

A useful approval names the treaty, the layer, the share, the modelled impact used and the approver's tier.

It must also be retrievable by someone who was not in the chat, months after the renewal.

Who Does What in a Treaty Capacity Sign-Off Workflow?

A treaty capacity sign-off workflow works when each role owns one clear part, and no role approves its own request.

Lloyd's MS2 Underwriting and Controls standard expects underwriting authorities in writing, signed and reviewed annually.

It also expects risks outside an underwriter's authority to be referred, with escalations properly recorded.

What does the CUO own in capacity sign-off?

The CUO owns capacity allocation by class and zone, and approval of lines above underwriter authority.

The CUO also decides how unused capacity moves between classes during the renewal.

What does the CRO own?

The CRO owns risk appetite limits and independent challenge, not day-to-day approval.

Under Solvency II Article 44, the risk-management system must cover underwriting and concentration risk management.

Capacity sign-off is one practical way to show that control works.

What do underwriters own?

Underwriters own the request and the commercial terms they put to the approver.

They should not move the share or terms after approval without a fresh sign-off.

What does exposure management own?

Exposure management owns the modelled impact of each proposed line on zone and peril budgets.

That impact should be dated, so the approver knows which portfolio view it used.

What does underwriting operations own?

Underwriting operations owns the record of approval and the check that the bound share matches it.

This is the step most often missed, because it happens after the deal feels done.

How does the RACI look in practice?

The RACI below shows a workable split. R is responsible, A is accountable, C is consulted and I is informed.

ActivityUnderwriterCUOCROExposure mgmtUW operations
Set risk appetite limits by zoneICA/RCI
Allocate capacity budget by class and zoneIACRI
Request sign-off with terms and shareA/RIICI
Model the line's impact on zone budgetCAIRI
Approve above underwriter authorityIA/RCCI
Record approval before firm orderCAIIR
Reconcile bound share to approved shareIAICR
Report capacity use against appetiteICARI

Which Authority Tier Should Approve a Line?

The authority tier that should approve a line depends on size and on how close the portfolio is to its limits.

The tiers below are illustrative. Calibrate them to your own appetite statement and business plan.

TierIllustrative triggerApproverEvidence recorded
1Within underwriter authority and zone budgetUnderwriterTerms, share, modelled impact
2Above underwriter authority, within class budgetClass head or CUO delegatePlus approver name and date
3Uses a large part of remaining zone capacityCUO with exposure managementPlus updated zone view
4Would take a zone close to an appetite limitCUO with CRO concurrencePlus CRO note and conditions

Whatever tiers you choose, write them into each letter of authority. Underwriters should know their limits before the season starts.

Where Do the Handoffs Fail?

The handoffs fail where one role assumes the next role has already checked.

HandoffTypical failureControl
Underwriter to exposure managementLine modelled at a different shareRequest states the exact share and layer
Exposure management to CUOApproval based on a stale portfolio viewModelled impact carries a date
CUO to underwriterApproval given verballyApproval recorded before firm order
Underwriter to brokerShare increased at signingAny change above approved share returns to the approver
Broker to operationsSigned share not checked to approvalMonthly reconciliation of bound to approved shares

What happens when sign-off follows the firm order?

When sign-off follows the firm order, the reinsurer is committed before the control has run.

If modelling then shows a zone over budget, the only options are to cut other lines or accept a breach.

What Should a Recorded Capacity Approval Show?

A recorded capacity approval should show enough for someone outside the deal to repeat the decision.

If an auditor needs to call the underwriter to understand it, the record is incomplete.

  • Treaty, cedent, layer and inception date.
  • Share requested and share approved.
  • Modelled impact on the zone or peril budget, with its date.
  • Remaining capacity in that zone after the line.
  • Approver name, authority tier and time of approval.
  • Any conditions, such as a lower share if the line is signed up.

The treaty capacity sign-off workflow is only complete when the bound share is checked against this record.

Three measures show whether it works: lines approved before the firm order, bound shares above approved shares, and approvals given at the wrong tier.

Report all three to the CUO monthly during renewal season, and to the risk committee each quarter.

Where Does Insurnest Fit in Capacity Governance?

Insurnest fits after binding, as the controlled record that capacity approvals are checked against.

Treaty Management holds one record per treaty, with structure, participation shares, retention, limits and thresholds.

Terms are versioned as amendments occur, and audit review covers treaty changes and calculation history.

Where does the treaty record stop?

The treaty record stops short of approval routing. Treaty Management does not route approvals, send alerts or model exposure.

Your sign-off workflow and exposure tools stay in place. The treaty record gives them one trusted view of what was actually bound.

For allocation controls, see our guide to capacity allocation operating controls.

How Should the CUO and CRO Prepare Before 1 January?

The CUO and CRO should agree the workflow before the renewal rush, not during it.

Repeat the review before the April, June and July renewals, when different zones fill up.

  • Publish the authority tiers and triggers to every underwriter.
  • Agree what a valid approval must state.
  • Book exposure modelling slots for the last two weeks of December.
  • Reconcile bound shares to approvals in January, and report exceptions.
  • Agree how capacity is released when a line is declined or signed down.
  • Review repeat exceptions, as covered in our guide on underwriting exceptions becoming the rule.

A short underwriting decision brief for each tier 3 or 4 line makes later review far easier.

Key Terms

  • Capacity: The share of modelled exposure, limit or premium budgeted by class, peril and zone.
  • Letter of authority: The written statement of what an underwriter may write.
  • Authority tier: A level of approval tied to line size or portfolio impact.
  • Firm order: The point at which the reinsurer commits to the line.
  • Appetite limit: The maximum exposure the board accepts for a zone, peril or class.
  • RACI: A matrix showing who is responsible, accountable, consulted and informed.

Sources

Frequently Asked Questions

What is a treaty capacity sign-off workflow?

A treaty capacity sign-off workflow is the set of steps that confirms a proposed treaty line fits approved capacity before an underwriter commits to it. It defines who models the impact, who approves at each authority tier, and how the approval is recorded against the bound terms.

Why do underwriters commit capacity before sign-off is recorded?

Underwriters commit capacity before sign-off is recorded because renewal deadlines are tight and approvals often happen by phone, chat or email. The decision may be sound, but nobody can later prove who approved which share, against which modelled impact, or before which firm order.

How should a reinsurer set capacity authority tiers?

A reinsurer should set capacity authority tiers by linking each tier to line size, share of remaining zone capacity and closeness to risk appetite limits. Routine lines stay with the underwriter, larger lines go to the CUO, and lines near appetite limits need CRO concurrence.

Who is accountable for treaty capacity sign-off?

Accountability for treaty capacity sign-off usually sits with the CUO for allocation and approval decisions and with the CRO for appetite limits and independent challenge. Underwriters request sign-off, exposure management models impact, and underwriting operations record the approval and reconcile it to the bound share.

What metrics show capacity sign-off is working?

Capacity sign-off metrics include the share of bound lines with an approval recorded before the firm order, bound shares that differ from approved shares, lines approved by the wrong authority tier, and zone capacity used against budget. A rising exception count is an early warning.

Can software automate treaty capacity sign-off?

Software can support treaty capacity sign-off by holding approved treaty terms, participation shares and limits in one versioned record. Approval routing and limit alerts need a workflow or exposure system that supports them. People still make the decision and own the accountability.

How does capacity sign-off differ from underwriting authority?

Capacity sign-off differs from underwriting authority because authority covers what a person may write, while capacity sign-off covers whether the portfolio can absorb it. An underwriter can be within personal authority yet still use too much of a peril zone budget.

Should a CRO approve every large treaty line?

A CRO should not approve every large treaty line, because that turns risk oversight into underwriting. The CRO should set appetite limits, concur only when a line moves a zone close to those limits, and review the sign-off record for exceptions each month.

Hitul Mistry

Hitul Mistry

CEO, Insurnest

An InsurTech leader with more than a decade of experience across insurance and technology, focused on solving business problems with the help of technology. Has worked with brokers, insurance carriers, and reinsurance firms across the India, UAE, and US markets.

View LinkedIn profile →
ShareLinkedInX

Read our latest blogs and research

Featured Resources

Reinsurance

Turning Capacity Allocation by Relationship Into a Measurable Management Process

When relationship-based allocation is replaced by a measurable, auditable process with defined criteria, the quality of every capacity decision improves—and the portfolio improves with it.

Read more
Reinsurance

The Earnings-Volatility Effect of Underwriting Exceptions Becoming the Rule

Underwriting exceptions that become the rule create earnings volatility that undermines the predictability of the reinsurance portfolio's financial performance. Learn how exception drift translates into P&L instability and erodes the enterprise's valuation multiple.

Read more
Strategic Leadership

Underwriting Decision Brief for India's Rs 30,000 Cr Claims Problem

The underwriting decision brief eliminates 70% of manual transcription, letting underwriters focus on risk decisions instead of data entry across NSTP cases.

Read more

Meet Our Innovators:

We aim to revolutionize how businesses operate through digital technology driving industry growth and positioning ourselves as global leaders.

circle basecircle base
Pioneering Digital Solutions in Insurance

Insurnest

Empowering insurers, re-insurers, and brokers to excel with innovative technology.

Insurnest specializes in digital solutions for the insurance sector, helping insurers, re-insurers, and brokers enhance operations and customer experiences with cutting-edge technology. Our deep industry expertise enables us to address unique challenges and drive competitiveness in a dynamic market.

Get in Touch with us

Ready to transform your business? Contact us now!

We respond within one business day.