Reinsurance

Placement File Checklist for Reinsurance Brokers: Evidence

On this page

Last reviewed: November 2026

Eighteen months after inception, a following reinsurer says its 27% written line should have signed at 21%, not 22.5%.

Another reinsurer had written its line to stand. Nobody can find where that condition was recorded.

On a USD 6m deposit premium, 1.5 points is USD 90,000. On a USD 15m limit, it is USD 225,000 of cover in dispute.

A placement file checklist for reinsurance brokers lists the evidence proving what each reinsurer agreed, on which terms and when.

This guide gives you the item-by-item checklist, a worked signing-down example from 120% and the shortcuts that fail.

Key Takeaways

  • The file proves the deal. Each item needs a source document and a date.
  • Line conditions travel with the line. "To stand" or a maximum line changes everyone's signing.
  • Show the signing arithmetic. Written total, factor and signed share per reinsurer.
  • Complete means 100%, cleared and dated. Not "mostly there".

What Goes on a Placement File Checklist for Reinsurance Brokers?

A placement file checklist for reinsurance brokers covers every item below, each with a source document and a date.

It sits after the reinsurance placement handoffs between teams. It is the record of what was agreed.

SectionItem to keepWhat proves itWhy it matters
QuoteEach reinsurer's quote or indicationDated email or platform record with terms and validityShows terms offered before the order
QuoteQuote comparison shown to the clientVersion sent, with dateEvidence of what the client saw
Firm orderClient's firm orderWritten instruction naming terms, order basis and dateBroker's authority to bind
LinesWritten linesEach line with %, conditions, date and timeWhat each reinsurer accepted
LinesLine conditions"To stand", maximum line, subject-to notesThey change the signing
LinesSigning calculationTotal written, factor, signed % per reinsurerProves the arithmetic
LinesSigned line noticesMessage to each reinsurer with signed %Closes each line
SubjectivitiesSubjectivity listItem, set by, owner, due dateCover may depend on them
SubjectivitiesClearance evidenceReinsurer's written confirmation, datedRemoves each condition
WordingAgreed wording versionFinal version with date and each agreementContract certainty
WordingSeveral liability clauseClause in the slip or contractEach reinsurer owes only its share
DatesPlacement timelineQuote, order, binding, inception, signing, wordingTerms final before inception

What quote and firm order evidence belongs in a reinsurance placement file?

Quote and firm order evidence in a reinsurance placement file means each dated quote and the client's written order.

The order must state its basis, such as 100% or 75% of 100%. Signing down works from that number.

Reinsurer quote tracking for brokers covers quotes in flight. The file keeps the final versions.

What written and signed line evidence should a broker keep?

Written and signed line evidence a broker should keep includes each line's percentage, conditions and timestamp.

Add the signing calculation and the dated notice telling each reinsurer its signed line. A stamp without a time proves little.

How should subjectivities be evidenced as cleared in a placement file?

Subjectivities should be evidenced as cleared in a placement file by written confirmation from the reinsurer that set them.

"Subject to satisfactory survey" stays open until that reinsurer says it is satisfied. The broker's own note is not clearance.

What wording evidence shows contract certainty on a reinsurance placement?

Wording evidence that shows contract certainty on a reinsurance placement is the final wording and each reinsurer's agreement to it.

Lloyd's contract certainty requirements describe complete and final agreement of all terms.

They also require an appropriate several liability clause, naming LMA 3333 as suitable for all contracts.

OSFI Guideline B-3 expects binding summary documents before cover starts.

Those documents should state the percentage of risk each reinsurer assumes. Your signed line notices are that evidence.

For more, see reinsurance contract certainty and reinsurance slip checking.

Which Placement File Shortcuts Fail When a Reinsurer Disputes Its Line?

Placement file shortcuts fail when a reinsurer disputes its line because they leave the broker's memory as the only record.

  • Final slip only. It shows signed lines but not the written lines or conditions behind them.
  • Email threads as the file. Conditions sit in replies nobody exports when staff move on.
  • Signing in a spreadsheet nobody kept. The arithmetic cannot be shown later.
  • "Cleared" ticks without the reply. A tick is the broker's view, not the reinsurer's.
  • Undated wording drafts. Nobody can show which version was agreed before inception.

Comparing the file with the bound contract is covered in quoted vs bound terms reconciliation.

How Are Written Lines Signed Down?

Written lines are signed down by multiplying each line by the order divided by the total written.

Take an illustrative property risk excess of loss layer of USD 15m xs USD 5m. The order is 100% and the deposit premium USD 6m.

What does signing down from 120% look like?

Signing down from 120% means each written line is multiplied by 100/120, which is five-sixths.

ReinsurerWritten lineSigned line (× 100/120)Signed premium on USD 6m
A36%30%USD 1,800,000
B30%25%USD 1,500,000
C27%22.5%USD 1,350,000
D18%15%USD 900,000
E9%7.5%USD 450,000
Total120%100%USD 6,000,000

Signed lines must total exactly the order. Premium shares must total the deposit, here USD 6m.

How does a line to stand change the signing down?

A line to stand keeps its written share, so only the other lines are signed down.

If B's 30% stands, 70% remains for A, C, D and E. Their written lines total 90%, so the factor is 70/90.

ReinsurerWritten lineSigned lineSigned premium on USD 6m
A36%28%USD 1,680,000
B (to stand)30%30%USD 1,800,000
C27%21%USD 1,260,000
D18%14%USD 840,000
E9%7%USD 420,000
Total120%100%USD 6,000,000

C signs at 21%, not 22.5%. That is the opening dispute, settled only if the "to stand" condition is in the file.

Signing rules come from the slip and market practice. Wording varies; check your contract.

When Is a Reinsurance Placement File Complete?

A reinsurance placement file is complete when four tests pass, and the file is locked with a review date.

  1. Signed lines total exactly the order, with the calculation saved.
  2. Every subjectivity shows the reinsurer's dated clearance.
  3. The agreed wording version is filed with each reinsurer's agreement.
  4. The timeline shows terms were final before inception.

A file that fails any test stays open on the broking compliance report. Run the checklist again before locking.

How Does Insurnest Help After a Placement Is Bound?

Reinsurance Treaty Management holds the bound result: structure, terms, signed shares and commission rules in one treaty record.

It applies configured formulas, such as ceded premium as GWP × ceded share, and keeps versions as terms are amended.

Its audit trail records treaty changes and calculation history.

Share calculations are covered in reinsurer participation share calculation.

It does not store placement documents, track quotes or clear subjectivities. Results depend on configuration, and teams validate them.

Key Terms

  • Written line: The share a reinsurer accepts when it writes on the slip, before signing.
  • Signed line: The share a reinsurer is finally bound to after signing down.
  • Line to stand: A condition that a written line is not reduced when the placement is oversubscribed.
  • Order basis: The share of the whole risk the client instructs the broker to place.

Sources

Frequently Asked Questions

What goes on a placement file checklist for reinsurance brokers?

A placement file checklist for reinsurance brokers covers quotes, the firm order, every written line with its conditions, the signing calculation, cleared subjectivities, the agreed wording and a dated timeline.

What quote and firm order evidence belongs in a reinsurance placement file?

Quote and firm order evidence in a reinsurance placement file means each dated quote with its terms, the version shown to the client and the client's written order stating the order basis.

What written and signed line evidence should a broker keep?

Written and signed line evidence a broker should keep includes each reinsurer's line with percentage, conditions and timestamp, the signing calculation and the dated signed-line notice.

How should subjectivities be evidenced as cleared in a placement file?

Subjectivities should be evidenced as cleared in a placement file by a dated written confirmation from the reinsurer that set them, filed against each listed item.

What wording evidence shows contract certainty on a reinsurance placement?

Wording evidence that shows contract certainty on a reinsurance placement is the final agreed wording version, each reinsurer's agreement to it and dates showing terms were final before inception.

How are written lines signed down?

Written lines are signed down by multiplying each line by the order divided by the total written. At 120% written for a 100% order, each line is multiplied by 100/120.

How does a line to stand change the signing down?

A line to stand keeps its written share, so only the remaining lines are signed down, and they share whatever is left of the order.

When is a reinsurance placement file complete?

A reinsurance placement file is complete when signed lines total exactly the order, every subjectivity is cleared, the wording is agreed and each item carries a date.

Hitul Mistry

Hitul Mistry

CEO, Insurnest

An InsurTech leader with more than a decade of experience across insurance and technology, focused on solving business problems with the help of technology. Has worked with brokers, insurance carriers, and reinsurance firms across the India, UAE, and US markets.

View LinkedIn profile →
ShareLinkedInX

Read our latest blogs and research

Featured Resources

Reinsurance

Reinsurance Placement Handoffs: Bringing Exposure, Broker Submission and Security Data Together

Reinsurance placement handoffs bring exposure data, broker submissions and security review together. Learn how shared placement data reduces errors and accelerates the placement-to-binding timeline.

Read more
Reinsurance

Quoted vs Bound Terms Reconciliation for Reinsurers

Quoted vs bound terms reconciliation catches changes made between quote and final slip. See a field-by-field cat XL example with premium impact.

Read more
Reinsurance

Reinsurance Contract Certainty: A Board-Level Risk

Reinsurance contract certainty: why unsigned wordings at inception create coverage, capital and accounting risk, with a worked timeline and board KPIs.

Read more

Meet Our Innovators:

We aim to revolutionize how businesses operate through digital technology driving industry growth and positioning ourselves as global leaders.

circle basecircle base
Pioneering Digital Solutions in Insurance

Insurnest

Empowering insurers, re-insurers, and brokers to excel with innovative technology.

Insurnest specializes in digital solutions for the insurance sector, helping insurers, re-insurers, and brokers enhance operations and customer experiences with cutting-edge technology. Our deep industry expertise enables us to address unique challenges and drive competitiveness in a dynamic market.

Get in Touch with us

Ready to transform your business? Contact us now!

We respond within one business day.