Reinsurance Slip Checking: Catch Errors Before Inception
On this page
- Key Takeaways
- What Is Reinsurance Slip Checking?
- Why Do Slip Errors Survive Until Inception?
- What Are the Most Common Mistakes With Terms?
- What Are the Most Common Mistakes With Wording?
- What Are the Most Common Process Mistakes?
- What Reinsurance Slip Checking Routine Prevents Errors?
- Where Does Insurnest Fit After the Slip Is Checked?
- Key Terms
- Sources
- Frequently Asked Questions
Last reviewed: November 2026
A slip error rarely looks like an error until a large loss arrives.
By then, the treaty has incepted and every party has a different reading of the same clause.
Reinsurance slip checking compares each treaty slip against the agreed quote, the expiring terms and the wording before inception.
It catches wrong figures, missing clauses and unclear definitions while they are still easy to fix.
Key Takeaways
- Check against something. A slip read on its own hides most errors.
- Recalculate, do not just read. Premium and commission figures must add up.
- Definitions decide recoveries. Event and hours clauses deserve legal eyes.
- Separate the checker from the negotiator. Four eyes catch what two miss.
What Is Reinsurance Slip Checking?
Reinsurance slip checking is the structured review of a slip before the treaty incepts.
It confirms that the slip says what the parties agreed, and that it can be administered as written.
Lloyd's contract certainty requirements call for complete and final agreement of all terms by the time the contract is entered into.
Reinsurance slip checking is how operations and legal teams make that real.
Why Do Slip Errors Survive Until Inception?
Slip errors survive until inception because many slips are drafted, changed and signed in a few busy weeks.
Each version is checked by the person who made the change, against their memory of the deal.
The slip also matters more than many teams assume. Labuan FSA's contract certainty FAQ notes that the Market Reform Contract may be treated as a complete slip.
What Are the Most Common Mistakes With Terms?
The most common mistakes with terms come from checking figures without a baseline.
Why is checking only the latest slip a mistake?
Checking only the latest slip is a mistake because errors are invisible without something to compare against.
Consequence: a limit, retention or rate that moved during placement goes unnoticed.
Fix: check every term against the final quote and the expiring slip, field by field.
Why is trusting "as expiring" a mistake?
Trusting "as expiring" is a mistake because the expiring terms may have been amended mid-term.
Consequence: an endorsement from last year is dropped, or carried forward when it should not be.
Fix: confirm which version "expiring" means, including all endorsements. Our guide to expiring vs renewal treaty terms covers this.
Why is reading figures without recalculating them a mistake?
Reading figures without recalculating them is a mistake because typed numbers often disagree with their own formula.
Consequence: deposit premium, commission or reinstatement premium is booked wrongly. The illustrative example below shows how.
A USD 10m xs USD 10m layer is priced at a 15% rate on line, so annual premium is USD 1.5m.
The slip gives one reinstatement at 100% additional premium, pro rata to amount. A USD 4m loss then needs USD 0.6m (USD 1.5m x 4/10) of reinstatement premium.
If the booking shows a free reinstatement, that USD 0.6m is never billed.
Fix: recalculate every derived figure, and check that the slip states the basis, not just the result.
What Are the Most Common Mistakes With Wording?
The most common mistakes with wording come from treating clauses as boilerplate.
Why is skimming definitions a mistake?
Skimming definitions is a mistake because definitions decide how losses aggregate.
Consequence: a changed event definition or hours clause alters how many retentions apply after a catastrophe.
Fix: compare every definition word for word with the expiring wording, and send changes to legal.
Why is ignoring clause references a mistake?
Ignoring clause references is a mistake because a clause number can point to the wrong edition or a different exclusion.
Consequence: an exclusion the underwriter relied on is not in the contract, or a broader one is.
Fix: open every referenced clause and confirm its title, edition and date.
Why is checking the slip but not the wording a mistake?
Checking the slip but not the wording is a mistake because the two documents can disagree.
Consequence: a dispute over which document wins, often years after the slip was signed.
Fix: check the wording against the slip on receipt, and log conflicts until they are resolved.
What Are the Most Common Process Mistakes?
The most common process mistakes come from who checks the slip and when the check ends.
Why is letting the negotiator check their own slip a mistake?
Letting the negotiator check their own slip is a mistake because that person reads what they meant, not what the slip says.
Consequence: drafting errors pass as intended terms.
Fix: use an independent checker in operations, who reads only the page.
Why is leaving subjectivities open at inception a mistake?
Leaving subjectivities open at inception is a mistake because nobody is then sure whether the terms fully apply.
Consequence: a claim arrives while a "subject to" condition is still unmet, and cover is argued.
Fix: log every subjectivity with an owner and due date, and escalate any still open at inception.
Our guide to reinsurance contract certainty explains why open terms cause disputes.
| Mistake | Consequence | Fix |
|---|---|---|
| Checking only the latest slip | Placement changes go unnoticed | Compare to quote and expiring |
| Trusting "as expiring" | Endorsements lost or wrongly kept | Confirm the exact expiring version |
| Not recalculating figures | Premium or commission booked wrongly | Recalculate every derived figure |
| Skimming definitions | Losses aggregate differently | Word-for-word compare, legal review |
| Ignoring clause references | Wrong or missing exclusion | Open and verify each clause |
| Slip not checked to wording | Later conflict over which wins | Check wording on receipt |
| Self-review only | Errors read as intended | Independent four-eyes check |
| Open subjectivities at inception | Cover argued at claim time | Log, own and escalate |
What Reinsurance Slip Checking Routine Prevents Errors?
A simple reinsurance slip checking routine prevents most errors if it runs on every treaty, every time.
- Before lines are written: compare commercial terms to the final quote.
- When the slip is final: run the field-by-field check below against the expiring slip.
- For changed wording: send definitions, exclusions and non-standard clauses to legal.
- Before inception: confirm subjectivities and sign off the check, with the checker's name.
- On wording receipt: check against the slip and log any conflict.
| Slip field | Compare against | Watch for |
|---|---|---|
| Limit, retention, layer | Quote and expiring | Moved figures, wrong currency |
| Rate and premium | Quote | Rate and premium that do not match |
| Reinstatements | Expiring and pricing | Missing basis, free vs paid |
| Commission and brokerage | Quote | Sliding scale ranges and caps |
| Definitions and hours clause | Expiring wording | Changed words, new triggers |
| Exclusions and clause references | Underwriting guidelines | Wrong edition or missing clause |
| Subjectivities | Underwriter notes | Open items with no due date |
Who should sign off the check?
The check should be signed off by an independent reviewer in operations, with legal sign-off for wording changes.
The underwriter confirms commercial intent, not the accuracy of the drafting.
General counsel should own a short list of clauses that always need legal review. Arbitration, governing law, sanctions and new exclusions are common choices.
Keep the signed check with the slip, so the evidence travels with the contract.
Where Does Insurnest Fit After the Slip Is Checked?
Insurnest fits after checking, when agreed terms must drive premium and settlement processing.
Treaty Management holds one record per treaty with structure, shares, limits, commission formulas, terms and settlement conditions.
Calculation rules are configured per treaty, and each result is linked to the treaty logic used.
What stays with your checkers and lawyers?
Your checkers and lawyers keep the slip review itself. Treaty Management does not read or check slips, and complex wording still needs interpretation.
Teams validate the configured terms and the results.
For slip capture, see our guide on turning a PDF slip into structured risk. For document control, see version control chaos in slips and wordings.
Key Terms
- Slip: The placing document that records the key agreed terms of a reinsurance contract.
- Wording: The full contract text, including clauses and definitions.
- Subjectivity: A condition that must be met before acceptance stands in full.
- Reinstatement premium: Premium paid to restore a layer's limit after a loss.
- Hours clause: A clause that sets the time window for grouping losses into one event.
- Contract certainty: Agreement of all terms by the time the contract is entered into.
Sources
Frequently Asked Questions
What is reinsurance slip checking?
Reinsurance slip checking is the review of a treaty slip against the agreed quote, the expiring terms and the wording before the treaty incepts. The goal is to catch wrong figures, missing clauses, unclear definitions and open subjectivities while they can still be corrected without dispute.
Why do reinsurance slip errors matter?
Reinsurance slip errors matter because the slip is often the main record of the contract. A wrong reinstatement term, a missing exclusion or an unclear event definition can change what is paid on a large loss, and fixing it after inception needs agreement from every party.
How do you check a reinsurance slip?
To check a reinsurance slip, compare every term against the final quote and the expiring slip, recalculate all premium and commission figures, and read every definition and clause reference. Then confirm open subjectivities, check the wording against the slip, and record who checked it.
Who should check a treaty slip before inception?
A treaty slip should be checked by someone other than the underwriter who negotiated it, usually in reinsurance operations or contract certainty. Legal or the general counsel's team should review new wordings, changed definitions and non-standard clauses, while the underwriter confirms commercial intent.
What are the most costly reinsurance slip mistakes?
The most costly reinsurance slip mistakes usually involve reinstatement terms, event definitions, hours clauses, exclusions and commission formulas. These terms decide how much is paid after a large loss, so a small drafting error can change recoveries or premiums by significant amounts.
Can software check reinsurance slips automatically?
Software can help with reinsurance slip checking by extracting slip data and comparing figures against expiring terms or a treaty record. Reading definitions, exclusions and intent still needs a trained person. Treat automated comparison as a first pass, not as legal review.
What is the difference between a slip and a treaty wording?
A slip is the summary placing document that records the key terms agreed by the market. A treaty wording is the full contract text with all clauses and definitions. Where both exist, they must agree, and conflicts should be resolved before inception.
Should slip checking happen before or after binding?
Slip checking should start before binding and finish before inception. Commercial terms should be checked against the quote before lines are written, and the final slip, clauses and wording should be checked before the treaty incepts, while changes are still easy to agree.

Hitul Mistry
CEO, Insurnest
An InsurTech leader with more than a decade of experience across insurance and technology, focused on solving business problems with the help of technology. Has worked with brokers, insurance carriers, and reinsurance firms across the India, UAE, and US markets.
View LinkedIn profile →