Obligatory Facultative Treaty Administration: Cession Log
On this page
- Key Takeaways
- What Is Obligatory Facultative Treaty Administration?
- Why Does a Fac-Oblig Treaty Drift Out of Control?
- Which Stages Make Up the Fac-Oblig Cession Workflow?
- What Fields Should a Fac-Oblig Cession Log Hold?
- How Does a Fac-Oblig Capacity Check Work?
- What Control Checks Belong at Each Fac-Oblig Stage?
- When Should a Fac-Oblig Cession Be Escalated?
- How Does Insurnest Support Fac-Oblig Treaty Administration?
- How Can Treaty Operations Heads Tighten Fac-Oblig Control This Quarter?
- Key Terms
- Sources
- Frequently Asked Questions
Last reviewed: November 2026
A large warehouse risk loses a roof in a storm, and the claims team asks which treaty pays.
The cedent's spreadsheet shows the risk under the fac-oblig treaty, but the declaration was logged two weeks after the storm.
Obligatory facultative treaty administration is the recording and control of every risk a cedent places under a fac-oblig treaty, from selection to final account.
Doing it well means one cession log, a named owner for each stage and a control check that fires before each cession reaches the account.
Key Takeaways
- The cedent chooses, the reinsurer must accept. That asymmetry makes the cession log the reinsurer's main control.
- Capacity is checked per risk, not per policy. Two policies on one location can breach the limit together.
- Declaration timing is a control, not admin. A cession logged after a known loss needs escalation.
- Every stage needs an owner. Unowned stages are where late and out-of-scope cessions slip through.
- The treaty record is the reference. Log checks only work if limits, shares and rules are held in one place.
What Is Obligatory Facultative Treaty Administration?
Obligatory facultative treaty administration is the process of logging, checking and accounting for each risk ceded to a fac-oblig treaty.
The Singapore Reinsurers' Association glossary describes a fac-oblig contract as one where the cedent has the option to cede.
The reinsurer, however, is obliged to accept cessions of a defined class that fall within the contract guidelines.
That places it between facultative and obligatory cover. Our treaty vs facultative reinsurance guide explains the wider difference.
Why Does a Fac-Oblig Treaty Drift Out of Control?
A fac-oblig treaty drifts out of control because the cedent selects the risks, yet nobody reviews each one before it attaches.
Swiss Re's guide to proportional and non-proportional reinsurance notes that under obligatory treaties, reinsurers skip individual acceptance.
Fac-oblig removes the cedent's duty to cede everything, but keeps the reinsurer's duty to accept. The cedent can keep the risks it likes.
Without a disciplined log, the reinsurer learns what it carries only when a large loss arrives.
Which Stages Make Up the Fac-Oblig Cession Workflow?
The fac-oblig cession workflow has six stages, from risk selection to expiry. Each needs a clear owner, trigger and output.
| Stage | Owner | Trigger | Deadline or output |
|---|---|---|---|
| 1. Select risk for cession | Cedent underwriter | Risk exceeds retention and surplus capacity | Cession request with risk details |
| 2. Eligibility and capacity check | Cedent treaty operations | Cession request received | Pass, or escalate before attachment |
| 3. Declare and log | Cedent treaty operations | Check passed | Log entry with declaration date |
| 4. Advise reinsurers | Cedent or broker | Bordereau period end, or per-risk advice if the treaty requires it | Bordereau or declaration within treaty time limit |
| 5. Account premium and commission | Reinsurance accounting | Account period close | Ceded premium, commission, net balance |
| 6. Endorse, cancel or expire | Cedent treaty operations | Original policy change or expiry | Updated log status and return premium |
Notice periods for stage 4 differ by treaty. Some treaties ask for a declaration per risk, while others accept a periodic bordereau.
What Fields Should a Fac-Oblig Cession Log Hold?
A fac-oblig cession log should hold enough fields to prove each cession was eligible, within capacity, declared on time and accounted correctly.
Which risk and capacity fields belong in the log?
The risk and capacity fields in a fac-oblig log are those that show whether the treaty limit was respected.
| Field | Example | Why it matters |
|---|---|---|
| Treaty reference and underwriting year | FO-PROP-2026 / UY 2026 | Ties the cession to the right terms |
| Original policy and risk ID | POL-88412 / LOC-0193 | Links policies on one location |
| Class or occupancy code | Warehouse, non-sprinklered | Tests scope and exclusions |
| Original period | 01-Mar-2026 to 28-Feb-2027 | Confirms attachment inside the treaty period |
| Sum insured and PML at 100% | USD 20m / USD 14m | Base for the capacity test |
| Cedent retention and surplus lines used | USD 2m / USD 10m | Shows what sits below the fac-oblig |
| Fac-oblig amount and cession % | USD 6m / 30% | Must not exceed the per-risk limit |
Which money and status fields belong in the log?
The money and status fields in a fac-oblig log are those accounting and claims teams need to rely on the cession.
| Field | Example | Why it matters |
|---|---|---|
| Original premium at 100% | USD 40,000 | Base for ceded premium |
| Ceded premium and commission | USD 12,000 / 25% | Drives the quarterly account |
| Declaration date | 04-Mar-2026 | Tested against the original inception and any loss date |
| Bordereau period reported | Q1 2026 | Prevents double or missed reporting |
| Status | Declared, accepted, out of scope, cancelled | Tells claims which cessions are live |
| Currency and rate of exchange | USD, at treaty rate | Avoids conversion breaks |
How Does a Fac-Oblig Capacity Check Work?
A fac-oblig capacity check works by stacking retention, surplus and fac-oblig lines against the sum insured and seeing what is left.
In this illustrative case, retention is USD 2m, the first surplus takes five lines (USD 10m) and the fac-oblig limit is USD 6m per risk.
| Layer | Amount (USD) | Share of USD 20m risk |
|---|---|---|
| Cedent retention | 2,000,000 | 10% |
| First surplus (5 lines) | 10,000,000 | 50% |
| Fac-oblig treaty | 6,000,000 | 30% |
| Unplaced balance | 2,000,000 | 10% |
| Total | 20,000,000 | 100% |
The fac-oblig takes 30% of the USD 40,000 premium, or USD 12,000. After 25% commission (USD 3,000), reinsurers receive USD 9,000.
The USD 2m balance needs separate facultative cover or the cedent keeps it. If someone logs USD 8m to the fac-oblig, USD 2m sits outside cover.
Why must cessions on the same location be added together?
Cessions on the same location must be added together because the per-risk limit usually applies to the risk, not to each policy.
A second policy of USD 3m on LOC-0193 would push the fac-oblig total to USD 9m if logged alone. The risk ID field is what catches it.
What Control Checks Belong at Each Fac-Oblig Stage?
The control checks at each fac-oblig stage are the tests that stop an ineligible or late cession reaching the account.
| Stage | Control check | Break it catches |
|---|---|---|
| Select | Risk exceeds retention and surplus capacity | Ceding risks the cedent could keep |
| Eligibility | Class, territory and exclusions against treaty | Out-of-scope classes (see treaty exclusion checks at cession) |
| Capacity | Sum of cessions per risk ID within limit | Over-cession on one location |
| Declare | Declaration date versus inception and known losses | Declaration after a known loss |
| Account | Log premium equals bordereau premium | Missing or duplicated cessions |
| Expire | Status updated at original expiry or cancellation | Live cessions on lapsed policies |
When Should a Fac-Oblig Cession Be Escalated?
A fac-oblig cession should be escalated whenever it falls outside the guidelines the reinsurer agreed to accept automatically.
- Outside class or territory. Route to the reinsurer's underwriter as a special acceptance request, not a log entry.
- Above the per-risk limit. Hold the excess and arrange separate facultative cover before attachment.
- Declared after a known loss. Stop accounting for the risk until both parties confirm treaty treatment.
- Missing PML or sum insured. Do not log a percentage that cannot be tested.
- Repeated selection pattern. Flag to the treaty manager if one occupancy dominates the ceded list.
How Does Insurnest Support Fac-Oblig Treaty Administration?
Treaty Management holds the fac-oblig treaty as a digital record with its structure, terms, participation shares, retention, limits and thresholds.
Commission structures and premium calculation rules are configured against the treaty, so ceded premium and commission follow the same logic each period.
Amendments are versioned, and calculation history with an audit trail shows which terms produced each result.
The cession-by-cession log, risk selection and late declaration decisions stay with your treaty and underwriting teams.
Those teams also validate the treaty configuration and the calculated results.
For the register that sits above the log, see our reinsurance treaty register guide.
How Can Treaty Operations Heads Tighten Fac-Oblig Control This Quarter?
Treaty operations heads can tighten fac-oblig control by testing last quarter's cessions against the log and the treaty terms.
- Recount capacity by risk ID. Group last quarter's cessions by location and compare each total with the per-risk limit.
- Compare declaration dates with loss dates. List every cession declared after a loss on the same risk.
- Reconcile log to bordereau. Match each cession to the premium reported, both ways.
- Profile what was ceded. Compare the ceded occupancy mix with the cedent's full book to spot selection.
Key Terms
- Fac-oblig treaty: A treaty where the cedent may choose what to cede and the reinsurer must accept eligible cessions.
- Per-risk limit: The maximum amount the treaty accepts on any one risk or location.
- Declaration: The cedent's notice that a specific risk has been ceded to the treaty.
- Anti-selection: A cedent ceding its weaker risks while keeping the better ones.
- Special acceptance: Agreement to cover a risk outside the treaty's automatic terms. See our inward treaty acceptance workflow.
Sources
- Singapore Reinsurers' Association: Glossary of Reinsurance Terms (F)
- Swiss Re: Proportional and non-proportional reinsurance
- Insurnest: Reinsurance Treaty Management
Frequently Asked Questions
What is obligatory facultative treaty administration?
Obligatory facultative treaty administration is the work of recording, checking and accounting for every risk a cedent places under a fac-oblig treaty. It covers eligibility, capacity, declaration timing, premium and status, so each cession can be proved to sit inside the treaty terms.
How does a fac-oblig treaty differ from a normal treaty?
A fac-oblig treaty differs from a normal obligatory treaty because the cedent chooses which risks to cede. The reinsurer must accept any ceded risk that falls within the treaty guidelines, so the reinsurer gives up individual selection while the cedent keeps it.
Why do fac-oblig treaties carry anti-selection risk?
Fac-oblig treaties carry anti-selection risk because the cedent decides which risks go to the treaty. A cedent can keep the risks it likes and cede the harder ones, so the reinsurer relies on the cession log and eligibility rules to see what it is actually carrying.
What fields should a fac-oblig cession log contain?
A fac-oblig cession log should contain the treaty and underwriting year, original policy and risk reference, class code, original period, sum insured, cedent retention, other treaty lines used, fac-oblig amount and percentage, premium, commission, declaration date and cession status.
How do you check capacity on a fac-oblig cession?
To check capacity on a fac-oblig cession, compare the amount ceded with the treaty's per-risk limit after retention and any surplus lines. Then add other cessions on the same location, because two policies on one risk can breach the limit even when each looks fine alone.
What happens if a fac-oblig risk is declared after a loss?
A fac-oblig risk declared after a known loss should be escalated before it is accepted into the account. The reinsurer and cedent need to check the treaty's declaration terms, because late declaration rules and their consequences differ by treaty and market.
Who owns the fac-oblig cession log?
The fac-oblig cession log is normally owned by the cedent's reinsurance or treaty operations team, which records each declaration. The reinsurer's treaty team reviews it against the treaty, while accounting uses it to build premium and commission in each account.
Can software administer a fac-oblig treaty automatically?
Software can hold fac-oblig treaty terms, shares, limits and premium rules so that cessions are checked against one configured record. Choosing which risks to cede, interpreting complex wording and validating results remain with the underwriting and treaty teams.

Hitul Mistry
CEO, Insurnest
An InsurTech leader with more than a decade of experience across insurance and technology, focused on solving business problems with the help of technology. Has worked with brokers, insurance carriers, and reinsurance firms across the India, UAE, and US markets.
View LinkedIn profile →