Reinsurance

Treaty Exclusion Checks at Cession: Stop Wrong Cessions

On this page

Last reviewed: November 2026

A renewal adds a new exclusion, and the cession system carries on as if nothing changed.

The error stays invisible until a large loss is rejected months later.

Treaty exclusion checks at cession test each risk against the treaty's exclusions before it is ceded or reported.

They turn wording into coded rules, send flagged risks to review, and stop excluded business reaching the treaty.

What Are Treaty Exclusion Checks at Cession?

Treaty exclusion checks at cession are controls that compare each policy with the exclusions in the treaty it is about to enter.

They run before the bordereau is sent, not after a claim is presented.

The aim is to catch the problem while fixing it costs a correction, not a dispute.

Most exclusions can be screened from policy data: class, occupancy, territory, peril, insured name or value. The rest need a person.

How Does an Excluded Risk Get Ceded?

An excluded risk gets ceded through a chain of small gaps, none of which looks serious alone. The walkthrough below is entirely hypothetical.

A cedent renews a 40% property quota share at 1 January. The reinsurers add an exclusion for power generation risks, which the expiring treaty covered.

What went wrong at renewal?

What went wrong at renewal was that the new exclusion was agreed but never handed over.

The reinsurance buyer accepted it in the final slip. The note to operations said "renewed as expiring, minor wording changes".

What went wrong at set-up?

What went wrong at set-up was that the cession rules were copied from the expiring year.

The exclusion lived only in the PDF wording. No rule excluded the power generation occupancy codes.

What went wrong during the year?

What went wrong during the year was that 14 power generation policies were ceded on monthly bordereaux.

They carried an illustrative USD 2.5m of premium, so USD 1.0m was ceded at 40%. The bordereau checks tested totals and shares, not exclusions.

What happened when the loss arrived?

When the loss arrived, a fire at an insured power plant produced a USD 12m claim.

The cedent booked a 40% recovery of USD 4.8m. The reinsurers' claims review found the exclusion and rejected the recovery.

The cedent now carries USD 4.8m more net loss, must correct USD 1.0m of ceded premium and restate its accounts.

MonthEventGap
DecemberExclusion added in final slipNo handover to operations
JanuaryCession rules copied from expiringWording not mapped to rules
January to June14 excluded policies cededBordereau checks ignore exclusions
JulyUSD 12m loss, USD 4.8m recovery bookedNo check at claim notification
SeptemberRecovery rejectedLoss, premium and accounts corrected

What Were the Root Causes?

The root causes were missing ownership and missing translation, not a lack of care.

  • No step turned new wording into new cession rules.
  • No one owned the gap between the buyer and operations.
  • Exclusions were not held in a structured list per treaty.
  • Bordereau checks covered arithmetic, not eligibility.

Each gap was small. Together they turned a wording change into a USD 4.8m loss.

Why do bordereau checks miss exclusions?

Bordereau checks miss exclusions because they are usually built to reconcile totals, shares and dates.

A bordereau can balance perfectly and still contain business the treaty does not cover.

Our guide to cession rules applied inconsistently explains this wider problem.

Which Treaty Exclusion Checks at Cession Would Have Stopped It?

The treaty exclusion checks at cession that would have stopped it sit alongside controls at renewal and at claim.

How should exclusions become cession rules?

Exclusions should become cession rules through a mapping from each exclusion to the policy data that can detect it.

Exclusion typeData field usedScreening method
Excluded class or occupancyClass and occupancy codesRule blocks listed codes
Excluded territoryRisk country or regionRule blocks listed territories
Sanctioned partiesInsured and beneficiary namesScreening against sanctions lists
Value thresholdsSum insured or limitRule flags values above threshold
Wording-based exclusionsPolicy wording or endorsementsExpert review of flagged policies

Sanctions exclusions need their own process. See our guide to sanctions screening for reinsurance.

What should happen to a flagged risk?

A flagged risk should go to an exception queue, not straight onto the bordereau.

The reviewer either excludes it, confirms it is outside the exclusion, or asks the reinsurer. Every decision is recorded.

Track flagged items per treaty. A sudden rise or fall usually means a rule or a data feed has changed.

What check belongs at claim notification?

The check that belongs at claim notification is a quick exclusion test on every large loss before a recovery is booked.

It is the last line of defence. It cannot undo a wrong cession, but it stops a wrong recovery from reaching the accounts.

It also gives an early warning to fix the rule, so the same error does not recur on the next bordereau.

Why do exclusion changes need back-to-back checks?

Exclusion changes need back-to-back checks because original policy exclusions and treaty exclusions can drift apart.

Lloyd's required state backed cyber-attack exclusions in standalone cyber policies from 31 March 2023.

Its market bulletin Y5381 told managing agents to check reinsurance programmes for back-to-back cover.

Treaty exclusions also change mid-cycle. The LMA published a model communicable disease exclusion for property treaty reinsurance in March 2020.

Our guides on ESG exclusions in reinsurance treaties and silent cyber across lines cover two common sources of change.

Which Treaties Carry the Highest Exclusion Risk?

The treaties that carry the highest exclusion risk are those where wording changes meet high cession volumes.

  • Treaties whose exclusions changed at the last renewal or by mid-term amendment.
  • Proportional treaties with automatic cession of large policy volumes.
  • Treaties fed by delegated or MGA business, where occupancy and class coding is weaker.
  • Multi-territory programmes, where territory exclusions differ by section.
  • Treaties whose original policies do not carry matching exclusions.

Start testing with these treaties. They are where one missed rule can affect hundreds of cessions.

For the CUO, the question is simple. Does the ceded book match what the reinsurers agreed to cover?

How Do You Test the Controls?

The controls are tested by running known cases through them and checking the evidence each time.

ControlTestFrequencyPass criteria
Wording-to-rules mappingCompare exclusion list to final wordingEach renewal and amendmentEvery exclusion mapped or marked "manual"
Pre-cession screeningRun sample excluded and included policiesEach renewal, then quarterlyExcluded samples flagged, included ones pass
Exception queueReview aged items and decisionsMonthlyNo item older than one bordereau cycle
Bordereau eligibility checkSample ceded policies against exclusionsMonthlyNo excluded policy found
Claim notification checkTest large losses against exclusionsEach large lossChecked before recovery is booked

What Role Does a Versioned Treaty Record Play?

A versioned treaty record plays the role of the controlled source of treaty terms that exclusion rules are built from.

Treaty Management holds one record per treaty, including terms and conditions, with versioned terms as amendments occur.

Audit review covers treaty information, changes and calculation history.

Where does screening still happen?

Screening still happens in your cession process. Treaty Management does not screen policies, send alerts or interpret complex wording.

Your cession rules and exception queue do the screening. The versioned treaty record shows what changed, so those rules can be updated on time.

What Should Operations Fix Before the Next Bordereau?

Operations should fix the handover first, because that is where this hypothetical failure started.

  1. Build an exclusion list for every treaty in force.
  2. Mark each exclusion as rule-based or manual review.
  3. Add a renewal step: no first cession until rules match the new wording.
  4. Add an eligibility check to the bordereau sign-off.
  5. Test exclusions on every large loss before booking a recovery.

Key Terms

  • Cession: Passing a share of a risk and its premium to a reinsurer under a treaty.
  • Exclusion: A treaty term that removes a class, peril, territory or party from cover.
  • Cession rule: A system rule deciding which policies enter which treaty.
  • Exception queue: A list of flagged policies awaiting a recorded decision.
  • Back-to-back cover: Reinsurance terms that match the original policies they protect.

Sources

Frequently Asked Questions

What are treaty exclusion checks at cession?

Treaty exclusion checks at cession are controls that test each risk against the treaty's exclusions before it is ceded or reported on a bordereau. They stop excluded classes, territories, perils or insureds from entering the treaty, where they would later cause rejected recoveries and premium corrections.

Why do excluded risks get ceded by mistake?

Excluded risks get ceded by mistake because exclusions live in the treaty wording, while cession runs on system rules copied from the expiring year. When a renewal adds or changes an exclusion and nobody updates the rules, excluded policies keep flowing into the treaty unnoticed.

How do you set up treaty exclusion checks?

To set up treaty exclusion checks, list every exclusion per treaty, map each one to policy data fields such as class, occupancy, territory or peril, and code it as a cession rule. Flagged risks go to an exception queue for review before the bordereau is sent.

Who owns treaty exclusion checks at cession?

Ownership of treaty exclusion checks at cession usually sits with the head of reinsurance operations, who owns the cession rules. The reinsurance buyer or CUO confirms what each exclusion means, and the underwriting team fixes policy data that cannot be screened reliably.

What does a wrongly ceded excluded risk cost?

A wrongly ceded excluded risk can cost the full expected recovery on any loss, because the reinsurer can reject it. The cedent then carries the loss net, corrects ceded premium, restates accounts and spends time in dispute. The cost grows the longer the error runs.

Can automation check treaty exclusions at cession?

Automation can check treaty exclusions at cession when exclusions are mapped to clean policy data fields. Rule-based screening handles class, territory and threshold exclusions well. Exclusions that depend on wording interpretation, such as some cyber or communicable disease clauses, still need expert review.

How do manual exclusion checks compare with rule-based checks?

Manual exclusion checks rely on someone remembering each treaty's exclusions while reviewing a bordereau, which fails at volume. Rule-based checks apply the same coded exclusions to every policy, every time, and send exceptions to people. Rules still need review whenever a treaty renews or changes.

Should exclusion rules be retested at every renewal?

Exclusion rules should be retested at every renewal and at every mid-term amendment. A short test using known excluded and known included sample policies shows whether the rules match the new wording before the first cession under the renewed treaty is processed.

Hitul Mistry

Hitul Mistry

CEO, Insurnest

An InsurTech leader with more than a decade of experience across insurance and technology, focused on solving business problems with the help of technology. Has worked with brokers, insurance carriers, and reinsurance firms across the India, UAE, and US markets.

View LinkedIn profile →
ShareLinkedInX

Read our latest blogs and research

Featured Resources

Reinsurance

Cession Rules Applied Inconsistently: The Problem Hiding Behind Portfolio Growth

Cession rules applied inconsistently create silent risk accumulation behind portfolio growth. Learn why inconsistent cession logic distorts risk distribution, undermines treaty performance, and hides in aggregate reports.

Read more
Reinsurance

ESG Exclusions in Reinsurance Treaties: Closing the Gap

ESG exclusions in reinsurance treaties explained: coal and oil sands wording, how exclusions create a cedent underwriting gap, a worked example and fixes.

Read more
Reinsurance

Silent Cyber Across Every LOB: Hidden Reinsurance Exposure

Silent cyber hides in property, casualty, marine, and D&O treaties. Learn how reinsurers find, price, and control non-affirmative cyber exposure.

Read more

Meet Our Innovators:

We aim to revolutionize how businesses operate through digital technology driving industry growth and positioning ourselves as global leaders.

circle basecircle base
Pioneering Digital Solutions in Insurance

Insurnest

Empowering insurers, re-insurers, and brokers to excel with innovative technology.

Insurnest specializes in digital solutions for the insurance sector, helping insurers, re-insurers, and brokers enhance operations and customer experiences with cutting-edge technology. Our deep industry expertise enables us to address unique challenges and drive competitiveness in a dynamic market.

Get in Touch with us

Ready to transform your business? Contact us now!

We respond within one business day.