Lineslip Administration: Tracking Declarations and Capacity
On this page
- Key Takeaways
- What Is Lineslip Administration in Reinsurance?
- Which Limits Should a Lineslip Tracker Measure?
- What Fields Belong in a Lineslip Declaration Log?
- How Much Lineslip Capacity Has Each Follower Used in a Worked Example?
- Which Lineslip Administration Errors Distort Capacity Usage?
- Who Owns Each Step of Lineslip Administration?
- How Does Insurnest Support Lineslip Administration?
- How Can Placement and Operations Heads Tighten Lineslip Control This Quarter?
- Key Terms
- Sources
- Frequently Asked Questions
Last reviewed: November 2026
It is late September, and the broker asks the lead underwriter to bind one more risk on the lineslip.
Nobody can say how much of the facility premium limit is left, or whether one follower has already reached its line.
Lineslip administration is the work of logging every declaration bound under a lineslip, applying each participant's line and tracking usage against limits.
Doing it well means one declaration log at 100%, shares applied by date, and a running headroom figure the leader, followers and broker all reconcile to.
Key Takeaways
- Log declarations at 100%. Shares are applied afterwards, never typed in by each follower.
- Every limit needs a basis. Written or earned, gross or net of returns, by attachment date or by entry date.
- Line changes are dated. A follower's new share applies to later declarations only.
- Headroom is a running figure. It should be known before the next declaration is bound, not at quarter end.
- Breaches are facility decisions. A risk that does not fit goes to all participants or to the open market.
What Is Lineslip Administration in Reinsurance?
Lineslip administration in reinsurance is the record-keeping behind a facility where a lead underwriter binds risks on behalf of following markets.
Each bound risk is a declaration. Followers are committed to their agreed share of each declaration that falls within the facility terms.
Lloyd's line slip guidance says lineslips do not need registration on its delegated authority systems.
It also says the lead managing agent should give followers sufficient data on a timely basis. A clean declaration log is how that duty is met.
Which Limits Should a Lineslip Tracker Measure?
A lineslip tracker should measure five limits, each with a stated basis. Without the basis, two parties can read the same log and reach different headroom figures.
| Limit | How it is measured | Basis to agree in writing |
|---|---|---|
| Per risk limit | Sum insured or limit of each declaration at 100% | Any one risk, any one location or any one insured |
| Facility premium limit | Cumulative declared premium at 100% | Written or net of cancellations and return premiums |
| Participant line | Share % applied to each declaration | Share in force on the declaration date |
| Follower monetary line | Share % × declaration limit | Each follower's own maximum any one risk |
| Declaration period | Date each risk attaches | Risks attaching during, not policy end dates |
The follower monetary line is easy to forget. A 15% share of a USD 50m risk is USD 7.5m, which may exceed one follower's own authority.
That check belongs at facility sign-on, before the first declaration. See our guide to treaty capacity sign-off workflow.
What Fields Belong in a Lineslip Declaration Log?
The fields in a lineslip declaration log should let anyone rebuild usage for any follower and any period from the log alone.
- Declaration reference and date bound. The date decides which share and which period apply.
- Insured, class and territory. These test the risk against the facility scope.
- Sum insured and premium at 100%. Shares are applied by calculation, not keyed.
- Leader sign-off. Name of the leader or drop-down leader who agreed the risk.
- Status. Bound, endorsed, cancelled or not taken up, with return premium recorded as a separate movement.
- Cumulative premium and headroom. Recalculated after every movement.
Lloyd's guidance expects a drop-down lead to act only when the named lead cannot write the risk. Recording who signed shows when that happened.
How Much Lineslip Capacity Has Each Follower Used in a Worked Example?
Lineslip capacity per follower is net declared premium multiplied by the share in force when each declaration was bound.
This illustrative example shows the steps.
A property facultative reinsurance lineslip runs from 1 January to 31 December 2026 on a risks attaching basis. Figures are in USD at 100%.
The per risk limit is 50m. The facility premium limit is 8.0m. The lead writes 25%, followers B, C and E 20% each, and D 15%.
How is cumulative lineslip usage calculated by quarter?
Cumulative lineslip usage by quarter is declared premium, less cancellations and return premiums, added to the prior total.
| Quarter | Premium declared | Returns and NTU | Net premium | Cumulative | % of 8.0m limit |
|---|---|---|---|---|---|
| Q1 | 1.95m | 0.15m | 1.80m | 1.80m | 22.5% |
| Q2 | 2.60m | 0.00m | 2.60m | 4.40m | 55.0% |
| Q3 | 3.05m | 0.15m | 2.90m | 7.30m | 91.3% |
Headroom at 30 September is 8.0m − 7.30m = 0.70m.
The largest Q3 declaration had a 48m sum insured, inside the 50m per risk limit. Follower D's line on it was 15% × 48m = 7.2m.
How is each follower's share of lineslip usage calculated?
Each follower's share of lineslip usage is its line multiplied by cumulative net premium, while shares stay unchanged.
| Participant | Line | Used to 30 September | Remaining headroom |
|---|---|---|---|
| Lead | 25% | 1.825m | 0.175m |
| B | 20% | 1.460m | 0.140m |
| C | 20% | 1.460m | 0.140m |
| D | 15% | 1.095m | 0.105m |
| E | 20% | 1.460m | 0.140m |
| Total | 100% | 7.300m | 0.700m |
What changes when a lineslip follower's line changes mid-period?
A lineslip follower's line change applies only to declarations bound after the change date.
From 1 October, C cuts its line to 10% and new follower F takes 10%. Q4 brings two declarations with 0.30m and 0.25m premium, so 0.55m in total.
C's correct usage is 1.460m + (10% × 0.55m) = 1.515m. F's usage is 10% × 0.55m = 0.055m.
A tracker that applies 10% to the whole year shows C at 10% × 7.85m = 0.785m. That understates C by 0.730m and credits F with usage it never wrote.
What happens when a declaration would breach the lineslip premium limit?
A declaration that would breach the lineslip premium limit cannot be bound under the facility as it stands.
After Q4's first two risks, cumulative usage is 7.30m + 0.55m = 7.85m, or 98.1% of the limit. A third risk with 0.35m premium would take it to 8.20m, or 102.5%.
Raising the limit is a change to the facility, so it normally needs every participant's agreement. Check the slip's amendment terms.
The alternative is placing the third risk in the open market, outside the lineslip.
Which Lineslip Administration Errors Distort Capacity Usage?
Lineslip administration errors distort capacity usage when the log and the facility terms are measured on different bases.
| Error | Effect on usage | Test that catches it |
|---|---|---|
| Returns not netted off | Usage overstated, risks refused that would have fitted | Sum of NTU and return premiums per quarter |
| New share applied to old declarations | Follower usage rewritten for the whole year | Recalculate usage by declaration date |
| Premium keyed at follower share, not 100% | Usage understated by the share factor | Compare log total with the broker's 100% figure |
| Endorsement premium missed | Usage understated as risks grow | Match endorsements to original declarations |
| Policy end date used for period | Late risks counted in the wrong facility year | Check every declaration's attachment date |
| Declaration exceeds per risk limit | Followers bound outside agreed terms | Flag any sum insured above the limit at entry |
Who Owns Each Step of Lineslip Administration?
Each step of lineslip administration needs one named owner, because the leader, broker and followers all hold part of the record.
| Step | Owner | Trigger | Output |
|---|---|---|---|
| Facility set-up | Broker and lead | Lineslip agreed | Limits, shares and bases recorded |
| Declaration entry | Broker or lead's operations team | Each risk bound | Log row at 100% |
| Headroom check | Lead's operations team | Before each bind | Remaining premium and per risk check |
| Line change | Broker, with all participants | Follower changes share | Dated new version of shares |
| Usage reconciliation | Each follower | Each quarter | Agreed usage per participant |
For how shares are calculated across a placement, see reinsurer participation share calculation.
How Does Insurnest Support Lineslip Administration?
Insurnest supports the contract record behind lineslip administration through Treaty Management.
It holds structured records with participation and share configuration, limits and thresholds.
It also applies configured premium calculation rules for treaty shares and premium amounts.
Amendments are versioned, with calculation history and an audit trail, so a dated line change like C's is kept rather than overwritten.
The product page does not list a lineslip declaration register. The per-declaration log and the headroom check before each bind stay with your team.
Output depends on the configured structure, and teams remain responsible for validating it. For multi-layer structures, see layered programme administration.
How Can Placement and Operations Heads Tighten Lineslip Control This Quarter?
Placement and operations heads can tighten lineslip control by rebuilding one live facility's usage from its declarations and comparing it with the figure in use.
- Write down the basis of every limit. Written or net, attaching or entry date, any one risk or any one location.
- Rebuild usage by declaration date. Check every follower whose line changed during the period.
- Test follower monetary lines. Compare share × per risk limit with each follower's own authority.
- Agree one reference log. Followers should reconcile to the same version every quarter.
Key Terms
- Lineslip: A facility where following markets delegate authority to a lead to bind risks within agreed terms.
- Declaration: One risk bound under a lineslip, recorded with its own sum insured and premium.
- Facility premium limit: The maximum premium that may be declared under a lineslip in its period.
- Drop-down leader: A named participant who leads only when the named lead cannot write the risk.
- Participant line: The share each market holds on every declaration, as recorded in a reinsurance treaty register.
Sources
- Lloyd's: Line slips (last updated 23 April 2026)
- Insurnest: Reinsurance Treaty Management
Frequently Asked Questions
What is lineslip administration?
Lineslip administration is the work of recording every declaration bound under a lineslip, applying each participant's line, and tracking how much of the facility's per risk and premium limits has been used, so the leader, followers and broker always agree on remaining capacity.
How does a lineslip differ from a binding authority?
A lineslip delegates authority from following underwriters to a lead underwriter or insurer, while a binding authority delegates to a coverholder. Lloyd's guidance states that lineslips must not be used to get around its requirements for binding authorities.
What limits should a lineslip declaration tracker measure?
A lineslip declaration tracker should measure the per risk limit at 100%, the facility premium limit for the period, each participant's share and monetary line, the class and territory scope, and the declaration period. Each limit needs a stated measurement basis.
How do you track lineslip capacity per follower?
To track lineslip capacity per follower, log each declaration at 100%, apply the share in force on the declaration date, net off cancellations and return premiums, then total by participant and period. Remaining headroom is the facility limit minus net usage.
What happens when a lineslip declaration would breach the premium limit?
When a lineslip declaration would breach the premium limit, the leader should not bind it under the facility as it stands. The usual options are agreeing a higher limit with every participant or placing the risk outside the lineslip in the open market.
Why do mid-period line changes cause lineslip errors?
Mid-period line changes cause lineslip errors because a tracker that applies the new share to every declaration rewrites history. Declarations bound before the change must keep the old share, and only later declarations take the new one.
Do Lloyd's lineslips need to be registered?
Lloyd's lineslips do not need registration with Lloyd's or on its delegated authority systems, according to Lloyd's line slip guidance. Lloyd's still expects the lead managing agent to give followers sufficient data on a timely basis.
Who should own the lineslip declaration log?
The lineslip declaration log is usually kept by the broker or the leader's operations team, with followers checking their own usage. Whoever owns it, one version should be agreed as the reference, and every follower should reconcile to it each period.

Hitul Mistry
CEO, Insurnest
An InsurTech leader with more than a decade of experience across insurance and technology, focused on solving business problems with the help of technology. Has worked with brokers, insurance carriers, and reinsurance firms across the India, UAE, and US markets.
View LinkedIn profile →