Underwriting Year vs Accident Year Reporting: A Worked Guide
On this page
- Key Takeaways
- What Is Underwriting Year vs Accident Year Reporting?
- How Do Treaty Data Elements Map Between the Two Bases?
- How Do You Convert One Underwriting Year Into Accident Years?
- Which Errors Break Underwriting Year to Accident Year Conversion?
- What Controls Keep Underwriting Year and Accident Year Reports Consistent?
- How Does Insurnest Support Underwriting Year and Accident Year Reporting?
- Where Should CFOs and Chief Actuaries Begin With Year-Basis Reporting?
- Key Terms
- Sources
- Frequently Asked Questions
Last reviewed: November 2026
The CFO sees a 60% loss ratio for the 2025 treaty year, while the actuarial pack shows 72.9% for part of the same business.
Both figures are right. They are cut on different years, and nobody has shown the bridge.
Underwriting year vs accident year reporting is the choice between grouping treaty premium and losses by the year policies were written or when losses occurred.
Converting between the two without rework needs one earning method, an accident date on every claim, and a bridge that ties both totals back.
Key Takeaways
- Underwriting year follows the contract. It keeps premium, losses and terms of one treaty year together.
- Accident year follows the loss date. It matches losses with premium earned in the same period.
- One accident year mixes underwriting years. Annual policies spread each year across two accident years.
- Earning is the bridge. The same earning method must drive both views and the ledger.
- The date of loss is the critical field. Without it, claims cannot be placed in an accident year.
What Is Underwriting Year vs Accident Year Reporting?
Underwriting year vs accident year reporting compares two ways of grouping the same transactions, each answering a different question.
The CAS text Basic Ratemaking describes policy year aggregation as sometimes called underwriting year.
It groups all premium and losses on policies written in a 12-month period, whatever the date of the claim. It calls this the best match between losses and premium.
Accident year aggregation groups losses by when the accident occurred, and compares them with premium earned in the same year.
The text notes that neither is fixed at year end, because claims keep developing. Calendar year, by contrast, is fixed once the year closes.
How Do Treaty Data Elements Map Between the Two Bases?
Treaty data elements map between the two bases differently, and the mapping table shows which need conversion.
| Data element | Underwriting year treatment | Accident year treatment | Conversion needed |
|---|---|---|---|
| Written premium | Whole premium to the year policies were written | Not used directly | Earn it first |
| Earned premium | Earned over policy periods, all kept in one year | Earned slices by calendar period | Split by earning pattern |
| Paid claims | By policy's underwriting year | By date of loss | Needs accident date |
| Case reserves | By policy's underwriting year | By date of loss | Needs accident date |
| IBNR | Projected per underwriting year | Projected per accident year | Separate method or allocation |
| Ceding commission | Settled per treaty year | Follows earned premium if needed | Usually stays on underwriting year |
| Treaty basis | Natural fit for risks-attaching treaties | Natural fit for losses-occurring treaties | Depends on the wording |
A losses-occurring treaty for 2025 covers losses occurring in 2025, so its treaty year already behaves like an accident year.
A risks-attaching treaty covers policies incepting in 2025 for their full term. Its losses can occur in 2025 or 2026.
How Do You Convert One Underwriting Year Into Accident Years?
You convert one underwriting year into accident years by earning premium into calendar slices, splitting losses by accident date, then adding slices across years.
The example below is illustrative, and earning conventions vary by company and class.
A property quota share for underwriting year 2025 attaches on a risks-attaching basis. The underlying policies are annual. Ceded written premium is 10,000,000.
How is underwriting year 2025 premium split across accident years?
Underwriting year 2025 premium is split across accident years using the eighths method, which assumes policies written in a quarter incept at mid-quarter.
| Quarter written | Written premium | Share earned in 2025 | Earned in 2025 | Earned in 2026 |
|---|---|---|---|---|
| Q1 | 4,000,000 | 7/8 | 3,500,000 | 500,000 |
| Q2 | 2,000,000 | 5/8 | 1,250,000 | 750,000 |
| Q3 | 2,000,000 | 3/8 | 750,000 | 1,250,000 |
| Q4 | 2,000,000 | 1/8 | 250,000 | 1,750,000 |
| Total | 10,000,000 | 5,750,000 | 4,250,000 |
Heavy first-quarter writing pushes 57.5% of premium into 2025. Even writing would give 50% each year.
How are underwriting year 2025 losses split across accident years?
Underwriting year 2025 losses are split across accident years by each claim's date of loss.
Incurred losses are 6,000,000, so the underwriting year loss ratio is 60%.
Of these, 2,900,000 occurred in 2025 and 3,100,000 in 2026, including a February 2026 storm.
The 2025 slice runs at 50.4% (2,900,000 ÷ 5,750,000). The 2026 slice runs at 72.9% (3,100,000 ÷ 4,250,000).
How does accident year 2025 combine two underwriting years?
Accident year 2025 combines the second-year slice of underwriting year 2024 with the first-year slice of underwriting year 2025.
Underwriting year 2024 wrote 9,000,000 evenly across the quarters, so half, 4,500,000, earned in 2025. Its losses dated 2025 are 3,300,000.
| Accident year 2025 | Earned premium | Incurred losses | Loss ratio |
|---|---|---|---|
| From underwriting year 2024 | 4,500,000 | 3,300,000 | 73.3% |
| From underwriting year 2025 | 5,750,000 | 2,900,000 | 50.4% |
| Accident year 2025 total | 10,250,000 | 6,200,000 | 60.5% |
The bridge works both ways. The two accident year slices of underwriting year 2025 add back to 10,000,000 and 6,000,000.
Which Errors Break Underwriting Year to Accident Year Conversion?
Errors that break underwriting year to accident year conversion usually come from the inputs to earning and the date of loss.
| Error | Symptom | Fix |
|---|---|---|
| Written premium used as accident year premium | Accident year loss ratio too low in a growth year | Earn premium before slicing |
| Claims without date of loss | Claims placed by report or payment date | Request accident date; write down any fallback rule |
| Treaty inception used instead of policy inception | All premium earned in one year | Earn from each policy's inception |
| Multi-year policies treated as annual | Slices too short for engineering or warranty business | Earn over the true policy term |
| Earning method differs from the ledger | Earned premium totals do not tie | Use one method for ledger and reports |
| IBNR held only by underwriting year | No accident year reserve view | Allocate with a documented method |
| Cancellations not re-earned | Underwriting year falls, accident year unchanged | Re-run earning after return premium |
| Different exchange rates per view | Same treaty, different totals in each view | Convert both views at one stated set of rates |
Monthly data allows a finer earning convention, such as twenty-fourths, which assumes mid-month inception. Whichever is used, the same one should drive every view.
Earning patterns are covered in our earned premium calculation guide.
Reserve splits are covered in IBNR allocation to reinsurers.
What Controls Keep Underwriting Year and Accident Year Reports Consistent?
Controls keep underwriting year and accident year reports consistent by proving that both views come from one set of transactions.
- Row and column tie-out. The accident year slices of each underwriting year must sum to its total, and the reverse.
- One earning engine. Ledger, reserving and management reports use the same earning method.
- Accident date completeness. Report the share of claims with a valid date of loss for each cedent.
- Same valuation date. Both views use the same claims valuation date.
- One ceded source. Both views start from ceded premium and claims reconciled to the registers.
Teams that hold different figures for one treaty face the problem described in reporting the same treaty differently.
How Does Insurnest Support Underwriting Year and Accident Year Reporting?
Insurnest supports the reconciled input to underwriting year and accident year reporting. It does not convert between bases.
Bordereaux Calculation & Reconciliation maintains participation percentages and allocates premium and claims by reinsurer share.
It calculates reinsurer-level net positions and compares them with bordereaux, master data, the premium and claim registers and settlement records.
Mismatches appear in one view, with a reinsurer-wise status of reconciled or variance to investigate.
Earning, accident year slicing and IBNR stay with your finance and actuarial teams, working from those reconciled figures.
Where Should CFOs and Chief Actuaries Begin With Year-Basis Reporting?
CFOs and chief actuaries should begin by building the bridge for one large risks-attaching treaty, for its last two underwriting years.
- Agree the earning method. Confirm the ledger and the actuarial pack use the same one.
- Measure accident date coverage. Count claims per cedent with no valid date of loss.
- Build the matrix. Underwriting years down the side, accident years across the top.
- Tie both directions. Rows and columns must add back to the reconciled totals.
- Settle old years first. Our guide to closing old underwriting years shows what has to be final.
Key Terms
- Underwriting year: Grouping by the year the underlying policies were written or the treaty incepted.
- Accident year: Grouping losses by the year they occurred, matched with premium earned that year.
- Risks-attaching treaty: A treaty covering policies that incept in its period, for their full term.
- Losses-occurring treaty: A treaty covering losses that occur in its period, whatever the policy date.
- Eighths method: An earning convention that assumes quarterly writings incept at mid-quarter.
Sources
- Casualty Actuarial Society: Basic Ratemaking, Fifth Edition (Werner and Modlin) (May 2016)
- Insurnest: Bordereaux Calculation & Reconciliation
Frequently Asked Questions
What is underwriting year vs accident year reporting?
Underwriting year vs accident year reporting is the choice between grouping treaty premium and losses by the year the underlying policies were written, or by the year the losses occurred. Underwriting year follows the contract; accident year compares losses with premium earned in the same period.
Why do reinsurers report on an underwriting year basis?
Reinsurers report on an underwriting year basis because risks-attaching treaties, commissions and profit tests are agreed per treaty year. Grouping premium and losses by underwriting year keeps each year's results with the contract terms that produced them, until the year is closed.
When is accident year reporting more useful than underwriting year?
Accident year reporting is more useful when premium earned in a period must be compared with losses occurring in the same period, as in many financial and reserving views. It also fits losses-occurring treaties, where the treaty year already follows the date of loss.
How do you convert underwriting year data to accident year?
To convert underwriting year data to accident year, earn each underwriting year's written premium over the policy periods into calendar slices, split losses by accident date, then add the slices from every underwriting year that touch the same accident year. Both totals must tie back.
What is the eighths method in premium earning?
The eighths method assumes annual policies written in a quarter incept at mid-quarter. Policies written in the first quarter earn seven eighths in their first year, second quarter five eighths, third quarter three eighths and fourth quarter one eighth, with the rest earned the following year.
Which data field is essential for accident year conversion?
The data field that is essential for accident year conversion is the date of loss. Bordereaux that show only report date or payment date cannot place claims into accident years reliably. Cedents should supply the accident date, and any fallback rule should be written down and applied consistently.
Can one accident year contain more than one underwriting year?
One accident year can contain more than one underwriting year. With annual policies on a risks-attaching treaty, accident year 2025 combines the second-year slice of underwriting year 2024 with the first-year slice of underwriting year 2025.
Does Insurnest convert underwriting year data to accident year?
Insurnest does not convert underwriting year data to accident year. Its Bordereaux Calculation & Reconciliation allocates premium and claims by reinsurer share and compares them against bordereaux, registers and settlement records, giving finance and actuarial teams one reconciled ceded dataset to convert.

Hitul Mistry
CEO, Insurnest
An InsurTech leader with more than a decade of experience across insurance and technology, focused on solving business problems with the help of technology. Has worked with brokers, insurance carriers, and reinsurance firms across the India, UAE, and US markets.
View LinkedIn profile →