Underwriting Submission Summary: One-Page Underwriter Brief
On this page
- Key Takeaways
- What Is an Underwriting Submission Summary in Reinsurance?
- Why Does a Broker File Need a One-Page Underwriter Brief?
- What Goes Into an Underwriting Submission Summary Template?
- What Does a Filled Underwriting Submission Summary Look Like?
- What Quality Rules Keep an Underwriting Submission Summary Reliable?
- How Does Insurnest Support Underwriting Submission Summaries?
- Where Should Treaty Underwriting Heads Begin With a Standard Brief?
- Key Terms
- Sources
- Frequently Asked Questions
Last reviewed: November 2026
It is late November, and a property cat renewal lands with a 30-page slip, four spreadsheets and a modelling report.
The underwriter has three other quotes due the same week and needs to know what changed before reading anything else.
An underwriting submission summary is a one-page brief that condenses a broker's reinsurance submission into the facts an underwriter needs to decide.
The fix is a fixed template, filled from the broker file with a source for every figure, that leaves the decision itself to the underwriter.
Key Takeaways
- One page, fixed sections. The same layout every time lets underwriters scan, not search.
- Every figure needs a basis. State 100% or share, currency, date and source file.
- Changes from expiring get their own block. Wording shifts can matter more than price.
- Gaps are part of the brief. Missing data is listed, not quietly filled in.
- The decision box stays blank. The preparer gathers facts, and the underwriter decides.
What Is an Underwriting Submission Summary in Reinsurance?
An underwriting submission summary in reinsurance is a structured cover sheet for one broker file. It sits on top of the submission, not in place of it.
It differs from a board-level programme view. Our guide to the reinsurance programme summary covers that portfolio picture.
The brief answers four questions fast: what is being offered, at what price, against what exposure, and what is missing.
Why Does a Broker File Need a One-Page Underwriter Brief?
A broker file needs a one-page underwriter brief because the facts that drive the decision are scattered across the email, slip and attachments.
The retention sits in the slip, modelled losses in a PDF, and exposure in a spreadsheet with its own column names.
Each underwriter then rebuilds the same picture by hand, often under the inbox pressure described in reinsurance underwriter email overload.
A standard brief does that work once, in the same order, so peer review and referrals start from shared facts.
What Goes Into an Underwriting Submission Summary Template?
An underwriting submission summary template holds eight sections, each with fixed fields and a named source in the broker file.
| Section | Fields | Typical source | Why it matters |
|---|---|---|---|
| 1. Header | Cedent, broker, class, inception, quote-by date, share requested | Broker email, slip | Sets the deadline and the line being asked for |
| 2. Structure | Layers, limits, retention, reinstatements, hours clause, perils, territory | Slip, draft wording | Defines what the layer actually pays |
| 3. Price signals | Expiring rate on line, broker indication, 100% and share premium | Slip, prior year file | Anchors price before any modelling |
| 4. Exposure | Total sum insured by zone, modelled losses, model and version, data date | Exposure file, modelling report | Shows the risk behind the price |
| 5. Loss experience | Events by year, gross loss, loss to each layer, basis | Loss listing | Tests the layer against real events |
| 6. Changes from expiring | Every term that differs, with likely effect | Slip vs prior slip | Surfaces quiet shifts in cover |
| 7. Gaps and queries | Missing data, inconsistencies, questions for the broker | Preparer's review | Keeps unknowns visible |
| 8. Decision box | Line, price view, conditions, sign-off | Underwriter only | Keeps authority with the underwriter |
Rate on line is the reinsurance premium divided by the layer limit, as the Singapore Reinsurers' Association glossary defines it.
Which fields belong in the header block of the brief?
The header block of the brief holds the fields that decide priority: cedent, broker, inception date, quote-by date and the share requested.
Put the quote-by date in bold. A perfect brief delivered after the deadline is worth nothing.
How should changes from expiring be shown on the brief?
Changes from expiring should be shown on the brief as a three-column list: expiring term, renewal term and likely effect on the layer.
Our guide to expiring vs renewal treaty terms explains the full comparison behind this section.
What Does a Filled Underwriting Submission Summary Look Like?
A filled underwriting submission summary for a property cat XL renewal looks like the table below. All names and figures are illustrative.
The cedent is a regional property insurer renewing a three-layer programme. The reinsurer is asked to renew a 7.5% share of layer 2.
| Field | Entry |
|---|---|
| Header | Regional property insurer, via broker; property cat XL; inception 1 January 2027; quote-by 5 December 2026; 7.5% of layer 2 requested |
| Programme | Layer 1: 40m xs 20m; Layer 2: 60m xs 60m; Layer 3: 80m xs 120m; all USD |
| Layer 2 terms | 1 reinstatement at 100%; perils: windstorm, flood, earthquake; hours clause 72 windstorm, 168 flood (see changes) |
| Expiring price | Rate on line 9.0%; 100% premium 5.4m (60m × 9.0%); 7.5% share 405,000 |
| Broker indication | Rate on line 8.5%; 100% premium 5.1m (60m × 8.5%); 7.5% share 382,500; change −5.6% |
| Exposure | Total sum insured 53.8bn, up 12% from 48.0bn; data dated 30 June 2026 |
| Modelled losses | 1-in-100 occurrence loss 135m; 1-in-250 occurrence loss 210m; layer 2 expected loss 2.6m (model version not stated) |
| Loss experience | 10 years: two events hit layer 1; one 2021 storm at 78m gross cost layer 2 18m (78m − 60m); losses as reported, not indexed |
| Changes from expiring | Flood hours clause up from 72 to 168 hours; retention unchanged at 20m; cyber exclusion reference updated |
| Gaps and queries | Model version and settings; flood exposure split by zone; whether the 2021 loss is final |
| Decision box | Blank for the underwriter |
What do the numbers on the filled brief tell the underwriter?
The numbers on the filled brief tell the underwriter that price is falling while exposure is rising.
The broker's 8.5% rate on line falls 5.6% from 9.0% (8.5 ÷ 9.0 = 0.944). Over the same year, the sum insured rose 12% (53.8 ÷ 48.0 = 1.12).
Modelled expected loss of 2.6m on a 60m limit is a loss on line of 4.33%. At 8.5%, the rate on line is 1.96 times that figure (8.5 ÷ 4.33).
The 1-in-250 loss of 210m exceeds the programme top of 200m (120m + 80m), so the cedent keeps any loss above that level.
Which flags on the filled brief should the underwriter query first?
The flags on the filled brief that the underwriter should query first are the flood hours clause and the missing model version.
Hours clauses are commonly 72 or 168 hours, according to the Singapore Reinsurers' Association. Moving flood to 168 hours lets more flood claims count as one loss.
That can push a single flood event further into layer 2. A model result with no stated version cannot be compared with last year's.
What Quality Rules Keep an Underwriting Submission Summary Reliable?
The quality rules that keep an underwriting submission summary reliable are about basis, source and separation of fact from opinion.
| Rule | Weak entry | Reliable entry |
|---|---|---|
| State the basis | "Premium 5.4m" | "Premium 5.4m at 100%; 405,000 for 7.5%" |
| Cite the source | "PML 135m" | "1-in-100 occurrence loss 135m, modelling report p.4" |
| Date the data | "TSI 53.8bn" | "TSI 53.8bn as at 30 June 2026" |
| Split fact from opinion | "Clean account" | "Broker says clean; listing shows two layer 1 events" |
| Show gaps, never fill them | Model version left blank | "Model version not stated: query sent" |
| Keep the decision blank | Preparer suggests 8.0% | Decision box left for the underwriter |
The brief should also fit one page. If it runs longer, the detail belongs in the working file, not on the cover sheet.
How should a submission summary handle broker statements?
A submission summary should handle broker statements by labelling them as the broker's view and placing them next to the data that tests them.
"Improved risk management" is a claim. A falling loss frequency in the listing is evidence.
How Does Insurnest Support Underwriting Submission Summaries?
Reinsurance Email Intelligence supports the intake half of the brief. It reads the broker email together with its PDFs, spreadsheets and claims files.
It extracts cedent, broker, treaty structure, premium, limits and attachment, claims history and exposure into one structured submission view.
Inception and expiry, exclusions and conditions are captured in the same view.
It also flags missing or incomplete information during intake, which feeds the gaps section.
Our guide to incomplete reinsurance submissions covers why that matters.
The product does not write the brief's judgement. That part stays with the underwriting team.
Comparing changes from expiring, reading model output, sizing the line and setting the price are all underwriter tasks.
Where Should Treaty Underwriting Heads Begin With a Standard Brief?
Treaty underwriting heads should begin with a standard brief by testing the template on last season's renewals before the next one starts.
- Pick five renewals from last season. Fill the template from the original broker files and time each one.
- Compare against the final quote. Check whether the brief would have flagged the issues raised in referral.
- Agree the basis rules. Settle 100% vs share, currency and data dates before rollout.
- Fix the source fields. Map where each field sits in your largest brokers' files, as in Excel submission data extraction.
- Link the brief to clearance. Start it only after submission clearance, so no one briefs a duplicate file.
Key Terms
- Rate on line: Layer premium divided by layer limit, shown as a percentage.
- Hours clause: The time window in which claims from one event count as one loss.
- Loss on line: Expected layer loss divided by layer limit.
- Changes from expiring: Terms that differ between the expiring and renewal contract.
- Programme top: The highest point of cover, equal to the top layer's limit plus its attachment.
Sources
- Singapore Reinsurers' Association: Rate on Line
- Singapore Reinsurers' Association: Hours Clause
- Insurnest: Reinsurance Email Intelligence
Frequently Asked Questions
What is an underwriting submission summary?
An underwriting submission summary is a one-page brief that condenses a broker's reinsurance submission into the facts an underwriter needs to decide. It covers the cedent, structure, price signals, exposure, loss experience, changes from expiring terms, open gaps and a blank space for the underwriter's own view.
What sections should an underwriting submission summary include?
An underwriting submission summary should include eight sections: header, structure, price signals, exposure, loss experience, changes from expiring, gaps and queries, and the underwriter's decision box. Each figure should show its basis, such as 100% or share, its currency and the broker file it came from.
Who should prepare the underwriting submission summary?
The underwriting submission summary is usually prepared by an underwriting assistant or technician from the broker file, then reviewed by the underwriter. The preparer fills facts and gaps only. The line, price view and conditions stay with the underwriter who holds the authority.
How do you summarise a reinsurance submission on one page?
To summarise a reinsurance submission on one page, extract the structure, price, exposure and losses into fixed fields, compare each term with expiring, and list the gaps. Then cite the source file for every figure and leave the decision box blank for the underwriter.
Why should changes from expiring terms have their own section?
Changes from expiring terms need their own section because a renewal file rarely highlights them. A longer hours clause, a new exclusion or a higher retention can change the layer's risk more than the price change does, so each change should be listed with its likely effect.
Should a submission summary include a pricing recommendation?
A submission summary should not include a pricing recommendation from the preparer. It should show the expiring rate on line, the broker's indication and modelled loss figures, then leave the price view, line size and conditions for the underwriter to complete and sign.
How does rate on line appear on a submission summary?
Rate on line appears on a submission summary as the layer premium divided by the layer limit, shown for expiring terms and the broker's indication. The brief should also show the 100% premium and the premium for the requested share, so the basis is never confused.
What makes an underwriting submission summary unreliable?
An underwriting submission summary becomes unreliable when figures lose their source, basis or date. Mixing 100% and share amounts, using stale exposure data without saying so, or blending broker opinion with cedent data all lead underwriters to trust numbers they should question.

Hitul Mistry
CEO, Insurnest
An InsurTech leader with more than a decade of experience across insurance and technology, focused on solving business problems with the help of technology. Has worked with brokers, insurance carriers, and reinsurance firms across the India, UAE, and US markets.
View LinkedIn profile →