Reinsurance

Retrocession Bordereaux Preparation: Fields and Filters

By Hitul Mistry17 Nov 26~7 min read
On this page

Last reviewed: November 2026

The whole account retro renews, and the lead retrocessionaire queries the first quarterly bordereau.

The refinery line was ceded twice: once to its facultative retro, and again in full to the quota share.

Retrocession bordereaux preparation is the work of selecting the inward contracts under each retro contract, applying its share and base, and reporting the result.

Doing it reliably needs a fixed field list, a written cession filter per retro contract, and an inuring order applied before any share is calculated.

Key Takeaways

  • Every retro contract needs a written filter. Inclusions, exclusions, share and premium base, in one place.
  • Inuring order comes first. Specific retros reduce the base the whole account retro sees.
  • The premium base must match the wording. Gross or net of inward acquisition costs changes every figure.
  • Inward dates drive retro accounting. Retro recognition can depend on when the inward contracts began.
  • Claims reporting is a separate output. Keep it out of the premium and risk bordereau.

What Is Retrocession Bordereaux Preparation?

Retrocession bordereaux preparation is the reinsurer's process of turning its inward book into premium and risk reports for each retro contract.

Unlike a cedent's bordereau, the source is not policies. It is the reinsurer's own inward treaties and facultative lines, at its written or signed share.

Claims notification and claims accounting to retrocessionaires follow separate rules. See claims reporting to retrocessionaires.

Which Fields Should a Retrocession Premium Bordereau Carry?

A retrocession premium bordereau should carry three groups of fields: inward contract identity, risk and exposure, and premium.

Which inward contract fields identify each ceded line?

Inward contract fields identify each ceded line by linking it back to one inward treaty or facultative risk.

FieldWhat to captureWhy retrocessionaires need it
Inward contract referenceTreaty or fac reference, with sectionTraces every line to the inward book
Cedent and brokerLegal namesConcentration and counterparty review
Underwriting yearInward year of accountMust sit inside the retro period
Class and territoryUsing the retro wording's class listDrives inclusion and exclusion
Inward basisRisks attaching or losses occurringDecides which retro year responds
Inward inception and expiryDates of each inward contractNeeded for earning and recognition

Which risk and exposure fields do retrocessionaires need?

Retrocessionaires need risk and exposure fields that show how much the reinsurer has written, not just the premium.

FieldWhat to captureWhy retrocessionaires need it
Inward structureQuota share, surplus, per risk XL, cat XL, facShapes the ceded exposure
Limit and attachment at 100%For non-proportional businessSize of each layer
Inward written and signed shareBoth, where they differCeded figures should use the signed share
Sum insured or PML at shareFor proportional and fac linesExposure the retro carries
Peril and zone flagsWhere the retro covers catLinks to the retro cat exposure return

Which premium fields drive the retro account?

Premium fields drive the retro account because the retro premium is a share of an agreed base, not of whatever the inward ledger shows.

FieldWhat to captureWhy it matters
Inward gross premium at shareBy accounting periodStarting point
Inward acquisition costsCommission and brokerage paid inwardNeeded if the base is net
Retro premium baseGross or net, per wordingChanges the ceded premium
Retro sharePer retro contractApplied after inuring retros
Retro premium and currencyOriginal currency and periodTies to the retro account
AdjustmentsInward reinstatement and adjustment premiumsIncluded only if the wording says so

Which Cession Filters Decide What Goes to Each Retro Contract?

Cession filters decide what goes to each retro contract by combining inclusions, exclusions, share and inuring order. The figures below are illustrative.

A reinsurer buys three retro contracts for underwriting year 2026.

Retro contractIncludesExcludesShare and baseInuring order
R1 Marine quota shareInward marine cargo and hullWar, inward retro40% of inward premiumFirst
R2 Facultative retroInward fac line on one refineryEverything else50% of that lineFirst
R3 Whole account property quota shareInward property treaty and facInward retro, marine25% of property premium net of R2After R1 and R2

How do the filters apply to five inward contracts?

The filters apply to five inward contracts by testing each one against every retro in inuring order.

Inward contractInward premium at shareR1R2R3 baseR3 at 25%
A Property quota share2,000,000––2,000,000500,000
B Property cat XL1,200,000––1,200,000300,000
C Marine cargo quota share800,000320,000–Excluded–
D Refinery fac line500,000–250,000250,00062,500
E Inward property retro600,000––Excluded–
Total5,100,000320,000250,0003,450,000862,500

Ceding D gross to R3 would make the base 3,700,000 and the R3 premium 925,000. That overstates R3 by 62,500, the double cession in the opening example.

Including E, which the wording excludes, would add another 150,000 (600,000 × 25%) to R3.

Some contracts state the base gross of inward acquisition costs, others net. Read each wording before applying a share.

Which Red Flags Should Hold a Retrocession Bordereau?

Red flags that should hold a retrocession bordereau are signs that a line is in the wrong retro, at the wrong base or at the wrong share.

Red flagLikely causeCheck
Line appears in two retros with no inuring ruleFilters overlapConfirm inuring order in both wordings
Inward underwriting year outside the retro periodWrong year mappingCompare inward basis with retro basis
Written share used where signed share differsSigning not yet loadedUse signed lines once known
Retro premium above inward premium for a lineShare applied to 100% instead of the reinsurer's shareRecalculate from share premium
Excluded class presentClass codes not mapped to the wordingMap inward classes to the retro class list
Totals do not tie to the inward registerLines missing or duplicatedReconcile counts and premium by year

Signed and written share differences are covered in our layered programme administration guide.

Who Checks What Before a Retrocession Bordereau Is Sent?

Checks before a retrocession bordereau is sent are split between the retro desk, technical accounting and finance.

RoleChecksWhen
Head of retrocessionFilters, exclusions and inuring order match each wordingAt retro inception and on any wording change
Inward technical accountingInward premium, shares and dates per contractEach accounting period
Retro technical accountingBase, share, currency and totals per retroBefore each bordereau is sent
Cat and exposure teamPeril and zone flags match the retro exposure returnEach exposure submission
FinanceRetro recognition and earning datesEach reporting close

The finance check matters under IFRS 17. A retro is a reinsurance contract held.

The 2017 IFRS 17 Effects Analysis explains when such a group is recognised.

For proportionate cover, it is the later of the start of its coverage period and the initial recognition of the underlying contracts.

Inward dates on the bordereau therefore matter. Confirm the current rule, including later amendments, with your auditors.

Accounting entries for retro are covered in retrocession accounting.

How Does Insurnest Support Retrocession Bordereaux Preparation?

Insurnest supports the share allocation and reconciliation step, not the preparation of retro bordereaux or the cession filters.

Bordereaux Calculation & Reconciliation maintains participation percentages and allocates premium and claims by reinsurer share.

It compares calculated values against bordereaux, master data, premium and claim registers and settlement records, with reinsurer-wise status.

It is described for reinsurer shares, so test it on your own retro panel data. Filters, inuring order and retro bordereau output stay with your team.

How Can Heads of Retrocession Tighten the Next Retro Bordereau?

Heads of retrocession can tighten the next retro bordereau by writing every filter down and testing it on last quarter's inward book.

  • Write one filter per retro contract. Inclusions, exclusions, share, base and inuring order in one table.
  • Map inward classes to each wording. Use the retro's class list, not the inward system's codes.
  • Re-run last quarter. Count lines in two retros, and lines in none.
  • Tie to the inward register. Premium and line counts by underwriting year should agree.
  • Separate the claims output. Send premium and risk data on its own bordereau.

For a refresher on structures, see retrocession explained.

Key Terms

  • Cession filter: The rule deciding which inward contracts feed a retro contract, and at what share and base.
  • Inuring: A retro bought for the benefit of another, reducing the base the second one sees.
  • Premium base: The inward premium figure, gross or net of acquisition costs, to which the retro share applies.
  • Signed share: The final share after any signing down of written lines.
  • Retrocessionaire: A reinsurer that accepts business ceded by another reinsurer.

Sources

Frequently Asked Questions

What is retrocession bordereaux preparation?

Retrocession bordereaux preparation is the work a reinsurer does to select inward contracts that fall under each retro contract, apply the agreed share and premium base, and report the resulting premium and risk data to retrocessionaires. Claims reporting to retrocessionaires is a separate process.

What fields should a retrocession premium bordereau contain?

A retrocession premium bordereau should contain the inward contract reference, cedent, underwriting year, class, territory, inward basis, limits and shares, exposure measures, inward premium at the reinsurer's share, the premium base used, the retro share, retro premium and the accounting period and currency.

What is a cession filter in retrocession?

A cession filter in retrocession is the rule that decides which inward contracts feed a given retro contract. It combines inclusions such as class, territory and underwriting year with exclusions from the retro wording, and states the share and premium base to apply.

How does inuring order affect a retrocession bordereau?

Inuring order affects a retrocession bordereau because a retro written for the benefit of another reduces the base the second one sees. If a facultative retro inures to a whole account quota share, the quota share should be ceded the net line, not the gross inward premium.

How do you prepare a retrocession bordereau?

To prepare a retrocession bordereau, list each retro contract with its filters and inuring order, select matching inward contracts, apply specific retros first, compute the premium base and share, reconcile totals to the inward premium register, then send it with any exclusions explained.

Should claims be reported on the retrocession premium bordereau?

Claims should not be mixed into the retrocession premium bordereau. Claims reporting to retrocessionaires follows its own notification and accounting rules, so premium and risk bordereaux and claims reporting are best prepared and reconciled as separate outputs.

Why does the inward inception date matter for retro accounting?

The inward inception date matters for retro accounting because, under IFRS 17, a group of proportionate reinsurance contracts held is recognised from the later of the start of its coverage period and the initial recognition of the underlying contracts. The retro bordereau supplies those dates.

Does Insurnest generate retrocession bordereaux?

Insurnest does not generate retrocession bordereaux or apply retro cession filters. Its Bordereaux Calculation & Reconciliation maintains participation percentages, allocates premium and claims by reinsurer share and compares the results with bordereaux and registers. Teams should test that participation model against their own retro panel data.

Hitul Mistry

Hitul Mistry

CEO, Insurnest

An InsurTech leader with more than a decade of experience across insurance and technology, focused on solving business problems with the help of technology. Has worked with brokers, insurance carriers, and reinsurance firms across the India, UAE, and US markets.

View LinkedIn profile →
ShareLinkedInX

Read our latest blogs and research

Featured Resources

Reinsurance

Retrocession Accounting: Align Retro With Inward Treaties

Retrocession accounting keeps outward retro premium, recoveries and IFRS 17 balances in step with inward treaties. Learn the cover map, event coding and checks.

Read more
Reinsurance

Claims Reporting to Retrocessionaires: Event to Settlement

Claims reporting to retrocessionaires, stage by stage: a timeline from first notice to settlement, who acts, what each loss advice holds and what breaks.

Read more
Reinsurance

Retrocession Explained: Who Reinsures the Reinsurers?

A practical guide to retrocession—how reinsurers transfer their own peak risk, the spiral risk it creates, and how ILS reshaped the retro market.

Read more

Meet Our Innovators:

We aim to revolutionize how businesses operate through digital technology driving industry growth and positioning ourselves as global leaders.

circle basecircle base
Pioneering Digital Solutions in Insurance

Insurnest

Empowering insurers, re-insurers, and brokers to excel with innovative technology.

Insurnest specializes in digital solutions for the insurance sector, helping insurers, re-insurers, and brokers enhance operations and customer experiences with cutting-edge technology. Our deep industry expertise enables us to address unique challenges and drive competitiveness in a dynamic market.

Get in Touch with us

Ready to transform your business? Contact us now!

We respond within one business day.