Reinsurance Premium Closings: Stop Repeated Rejections
On this page
- Key Takeaways
- What Are Reinsurance Premium Closings?
- Why Do Reinsurance Premium Closings Get Rejected or Queried?
- What Happens When a Premium Closing Uses Written Lines Instead of Signed Lines?
- What Should a Pre-Submission Checklist for Premium Closings Cover?
- Which Red Flags Mean a Premium Closing Should Be Held Back?
- How Does Insurnest Support Premium Closing Checks?
- How Can Broker Accounting Heads Cut Closing Rejections This Quarter?
- Key Terms
- Sources
- Frequently Asked Questions
Last reviewed: November 2026
The first instalment on a renewed cat programme is due, and the closing comes back queried for the second time.
The reinsurers' credit controllers are now chasing cash the broker cannot settle until the entry is fixed.
Reinsurance premium closings are the accounting submissions a broker makes so agreed premium is booked and settled with each reinsurer on the placement.
Getting them through first time means testing every closing against the slip, and the signed lines, before it is submitted.
Key Takeaways
- Most rejections are slip mismatches. The entry says one thing and the signed slip says another.
- Close on signed lines, never written lines. Oversubscribed layers must be signed down first.
- Brokerage drifts at renewal. Expiring-year rates copied forward change every market's net premium.
- Tax and territory splits are checked. Missing splits trigger queries that delay settlement.
- A second check costs less than a requery. Hold any closing that fails one test.
What Are Reinsurance Premium Closings?
Reinsurance premium closings are the step that turns a bound placement into accounting entries that each reinsurer can settle.
In the London market, Lloyd's describes the route plainly. Premiums are usually settled through central accounting.
To create the entries, the slip and a London Premium Advice Note (LPAN) are submitted for signing and processing, as set out in Lloyd's Market Bulletin Y5392.
The LPAN is produced by the broker and carries all details of the premium transaction. Central processing is now provided by Velonetic.
Outside London, "closing" is used more loosely for the premium account or debit note a broker sends each market. The checks below apply to both.
Why Do Reinsurance Premium Closings Get Rejected or Queried?
Reinsurance premium closings get rejected or queried when a field on the entry cannot be matched to the slip or to market rules.
The table lists the failure scenarios seen most often in broker technical accounting. Exact query wording differs by processor and market.
| Failure scenario | What the checker sees | Impact |
|---|---|---|
| Written lines used on an oversubscribed layer | Shares total more than 100% | Entry cannot be signed; whole closing returns |
| Signed line differs from the signing schedule | One market's share is off by a rounding or typing error | That market's premium is wrong; others may be held |
| Brokerage rate copied from the expiring year | Deduction differs from the renewal slip | Net premium to every market is wrong |
| Premium not split by territory or tax | Single entry on a multinational contract | Query on risk location; settlement delayed |
| Instalment number or due date out of sequence | Second instalment closed before the first | Instalment cannot be matched to the schedule |
| Unique market reference or period mismatch | Reference or dates differ from the slip | Entry cannot be linked to the contract |
| Currency or rate of exchange not as agreed | Settlement currency differs from the slip | Market books a different amount than expected |
| Same transaction submitted twice | Duplicate premium on one instalment | Overpayment risk and later reversal work |
Which London market rules shape a reinsurance premium closing?
London market rules shape a reinsurance premium closing mainly through risk location and tax.
Bulletin Y5392 lists territories where separate LPANs are needed for direct and reinsurance multinational contracts. Failing to split them out can be queried.
On delegated business, Lloyd's says that from 1 January 2026 Velonetic will query French and Monaco coverholder bordereaux missing IPT.
The same applies to missing parafiscal charges. Lloyd's notes those queries can delay premium processing and payment.
Check the current bulletins for your class before relying on any list.
What Happens When a Premium Closing Uses Written Lines Instead of Signed Lines?
A premium closing that uses written lines instead of signed lines bills the markets for more than 100% of the premium, so it cannot settle.
The example below is illustrative. Figures are in USD and chosen to make the arithmetic easy to follow.
A property cat excess of loss layer has a 100% deposit premium of 2,400,000, payable in four equal quarterly instalments of 600,000. The slip sets brokerage at 10%.
Four markets write lines totalling 125%, so the layer is oversubscribed.
How should signed lines be calculated on an oversubscribed reinsurance layer?
Signed lines on an oversubscribed reinsurance layer are calculated by scaling each written line down to 100%. Here every line is multiplied by 100 ÷ 125, or 0.8.
| Market | Written line | Signed line | Instalment 1 on written line | Instalment 1 on signed line |
|---|---|---|---|---|
| Reinsurer A | 40% | 32% | 240,000 | 192,000 |
| Reinsurer B | 35% | 28% | 210,000 | 168,000 |
| Reinsurer C | 30% | 24% | 180,000 | 144,000 |
| Reinsurer D | 20% | 16% | 120,000 | 96,000 |
| Total | 125% | 100% | 750,000 | 600,000 |
The written-line closing bills 750,000 against a 600,000 instalment. That 150,000 excess is the first thing a checker sees.
When lines do not scale cleanly, for example 112% written, rounded shares can total 99.999%. Agree how the residue is treated before closing.
What does a wrong brokerage rate do to each reinsurer's net premium?
A wrong brokerage rate changes each reinsurer's net premium by the rate difference times its gross share. Suppose the closing used last year's 12.5% instead of 10%.
| Market | Gross on signed line | Net at 10% (slip) | Net at 12.5% (closing) | Short-paid |
|---|---|---|---|---|
| Reinsurer A | 192,000 | 172,800 | 168,000 | 4,800 |
| Reinsurer B | 168,000 | 151,200 | 147,000 | 4,200 |
| Reinsurer C | 144,000 | 129,600 | 126,000 | 3,600 |
| Reinsurer D | 96,000 | 86,400 | 84,000 | 2,400 |
| Total | 600,000 | 540,000 | 525,000 | 15,000 |
The broker would over-deduct 15,000 on this instalment alone, or 60,000 across all four if the error repeats.
Our guide to reinsurance brokerage calculation covers how deductions are set on the slip.
What Should a Pre-Submission Checklist for Premium Closings Cover?
A pre-submission checklist for premium closings should test each field the processor or reinsurer will match against the slip.
| Check | Compare against | Pass condition |
|---|---|---|
| Signed lines | Signing schedule | Total exactly 100% of the order; rounding residue agreed |
| Premium per market | Slip premium × signed line | Every market's amount recomputes |
| Brokerage and deductions | Renewal slip, not expiring | Same rate and base for every market |
| Instalment | Premium payment schedule | Number, amount and due date in sequence |
| Territory and tax split | Risk locations on the contract | Separate entries where required; tax shown |
| References and period | Slip and contract record | Unique reference, inception and expiry match |
| Currency and exchange | Slip settlement terms | Agreed currency and rate of exchange |
| Duplicates | Previous closings on the contract | No earlier entry for the same instalment |
How each market's share should be derived is covered in our guide to reinsurer participation share calculation.
Which Red Flags Mean a Premium Closing Should Be Held Back?
Red flags that mean a premium closing should be held back are signs the entry was built from something other than the final slip.
- Shares that total anything but 100%. This usually means written lines or a missed signing down.
- A brokerage rate that matches last year. Confirm the renewal slip did not change it.
- One entry on a contract with several risk locations. Check whether territory splits apply.
- An endorsement after the last closing. A changed premium or share must flow into the next entry.
- A closing prepared from an email, not the slip. Rebuild it from the signed document.
How Does Insurnest Support Premium Closing Checks?
Insurnest supports premium closing checks through Bordereaux Calculation & Reconciliation, which covers the share and matching step.
It maintains participation percentages and allocates premium by each reinsurer's share.
It then compares those values with bordereaux, premium registers and settlement records.
Mismatches appear in one view, with each reinsurer marked as reconciled or as a variance to investigate.
It does not prepare or submit LPANs, check tax splits or handle resubmitted versions. Your team still works out why each variance arose and corrects the closing.
How Can Broker Accounting Heads Cut Closing Rejections This Quarter?
Broker accounting heads can cut closing rejections this quarter by studying the last batch of queries and fixing their causes at source.
- Tag every query by cause. Use the failure scenarios above, so the top two causes are visible.
- Recompute one month of closings. Rebuild each market's premium from the slip and signed lines.
- Lock brokerage at renewal. Record the renewal rate before the first instalment is closed.
- Map multinational contracts. List which contracts need territory splits before closing day.
Reinsurance broker technical accounting explains the wider account flow, and broker balance reconciliation covers what happens after cash moves.
Key Terms
- LPAN: London Premium Advice Note, the broker's record of a premium transaction for central processing.
- Written line: The share a reinsurer offers on the slip, which can total over 100%.
- Signed line: The final share after signing down, used for premium and claims.
- Signing down: Scaling written lines proportionally so they total 100% of the order.
- Central accounting: The London market route through which premium is processed and settled.
Sources
- Lloyd's: Market Bulletin Y5392, LPAN requirements for direct and reinsurance multinational contracts (20 December 2022)
- Lloyd's: Process change for coverholder business in France and Monaco
- Clyde & Co: New Velonetic Central Services Agreement (28 September 2026)
- Insurnest: Bordereaux Calculation & Reconciliation
Frequently Asked Questions
What are reinsurance premium closings?
Reinsurance premium closings are the accounting submissions a broker makes so that premium agreed on a placement is booked and settled with each reinsurer. In the London market a closing usually means the slip and a London Premium Advice Note sent for signing and processing through central accounting.
Why do reinsurance premium closings get rejected?
Reinsurance premium closings get rejected or queried when the entry does not agree with the slip. Common causes are written lines used instead of signed lines, a brokerage rate from the expiring year, missing tax or risk location splits, wrong references and instalments out of sequence.
What is an LPAN in reinsurance premium processing?
An LPAN, or London Premium Advice Note, is the document a broker produces with all details of a premium transaction. Lloyd's guidance says the slip and LPAN are submitted to the central processor for signing and processing, which creates the accounting entries for settlement.
What is the difference between written lines and signed lines?
Written lines are the shares reinsurers offer on the slip and can total more than 100% when a layer is oversubscribed. Signed lines are the final shares after signing down, always total 100% of the order, and are the shares premium must be closed on.
How do you prevent reinsurance premium closing rejections?
To prevent premium closing rejections, check each closing against the slip before it leaves the broker. Confirm signed lines total 100%, recompute each market's premium and brokerage, confirm tax and risk location splits, match references and instalment numbers, and hold any entry that fails one check.
How does a wrong brokerage rate affect a premium closing?
A wrong brokerage rate changes the net premium owed to every reinsurer on the closing. In the illustrative example, using 12.5% instead of the slip's 10% on a USD 600,000 instalment cuts the net premium due to reinsurers by USD 15,000.
Do tax splits matter for reinsurance premium closings?
Tax splits matter for premium closings because premium may need allocating by territory. Lloyd's has published territories where separate LPANs are needed for multinational contracts, and has said Velonetic will query French and Monaco coverholder bordereaux with missing IPT or parafiscal charges.
Who should check a reinsurance premium closing before submission?
A reinsurance premium closing should be prepared by the broker's technical accountant and checked by a second person against the slip. The placing broker confirms signed lines and brokerage, and a tax specialist confirms territory splits where the contract covers several countries.

Hitul Mistry
CEO, Insurnest
An InsurTech leader with more than a decade of experience across insurance and technology, focused on solving business problems with the help of technology. Has worked with brokers, insurance carriers, and reinsurance firms across the India, UAE, and US markets.
View LinkedIn profile →